Titanium Welding Wire Introduction:

TA1 Titanium Alloy Welding Wire
Meets: GB/T3623-2007 TA1
Description: TA1 is a commercial titanium welding wire. It boasts excellent welding process properties, with aesthetically pleasing weld bead shapes and superior comprehensive mechanical properties of the weld metal.
Application: Primarily used for welding titanium-based alloys.
Chemical composition of welding wire: %

Weld seam metal radiographic inspection requirements: Level Ⅰ

Important Notes and Operation Key Points:
Welding joints must be thoroughly cleaned of oil, rust, moisture, and other surface impurities.
2. To prevent oxidation due to excessively high surface temperature during welding, a tail shield must be added to enhance the protective effect.

TA2 Titanium Alloy Welding Wire

Meets: GB/T3623-2007 TA2
Description: TA2 is a commercial pure titanium welding wire with lower impurity content compared to TA1 wire, offering excellent mechanical properties and superior welding process performance.
Application: Used for welding titanium-based alloys, primarily for marine and saltwater heat exchangers, condensers, and paper bleaching systems in various engineering projects.
Chemical composition of welding wire: %

Weld seam metal radiographic inspection requirements: Grade I

Important Notes and Operation Key Points:
The welding area must be thoroughly cleaned of oil, rust, moisture, and other surface impurities.
2. To prevent oxidation due to excessive surface temperature during welding, a tail shield must be added to enhance the protective effect.