Product Features

Pipe Valve S Bend Customization, P Bend, Straight Through Tee Wholesale Price - Jiangsu Feike Pipe Valve Fitting Co., Ltd. A commonly used pipe fitting for pipeline installation, connecting two pipes with the same or different nominal diameters, allowing the pipeline to turn at a certain angle, with a nominal pressure of 1-1.6Mpa. 1. Since most pipe fittings are used for welding, to improve welding quality, the ends are machined into bevels, leaving a certain angle and edge. This requirement is also quite strict, with specific regulations on the thickness of the edge, the angle, and the deviation range. The surface quality and mechanical properties are basically the same as the pipe. For ease of welding, the steel type of the pipe fitting is the same as that of the connected pipe. 2. All pipe fittings must undergo surface treatment, removing the iron oxide scale on the inner and outer surfaces through shot blasting, and then applying anti-corrosion paint. This is for export requirements, and also for domestic transportation to prevent rust and oxidation, this work must be done. 3. The requirements for packaging are that for small pipe fittings, such as for export, wooden boxes are required, approximately 1 cubic meter, with a specification that the number of bends in such boxes should not exceed one ton. This standard allows for nesting, i.e., large inside small, but the total weight is generally not to exceed one ton. For large items like 24″, they must be individually packaged. Additionally, packaging markings must indicate dimensions, steel grade, batch number, manufacturer's trademark, etc.

Product Real Photo