Circular Pit Conveyor Product Description: The circular pit V-type pattern features a high friction coefficient, increasing resistance during operation to prevent material from sliding down. The acute angle of the V-shaped pattern aligns with the centerline, allowing the transported material to converge towards the central section.

Detailed Information on Round Groove Conveyor Belts: The round groove pattern features a high friction coefficient, which increases resistance during operation, preventing material from sliding down. Round groove conveyor belts are suitable for transporting coal, gravel, sand, grain, and soft bagged items with particle sizes under 50mm, with an inclination angle up to 30 degrees. The V-shaped round groove pattern with a round groove increases friction coefficient, enhancing resistance during operation to prevent material from sliding. The angle tips of the V-shaped pattern on the centerline allow the transported material to converge towards the central part.

Tread pattern with an "I" shape; the pattern can be further divided into high, medium, and low grades.
Features: The surface features a "man" pattern that is higher than the belt body, which can be either open or closed. Each pattern is unique.
Application: Suitable for conveying powdery, granular, and small-sized materials with inclination angles of ≤40 degrees, also capable of conveying bagged materials.
Striped pattern
Features: The surface of the belt features a raised strip pattern that stands out from the belt body. The patterns are categorized into high, medium, and low, each with varying spacing that can be further divided into sparse and dense forms.
Usage: Suitable for horizontal conveying of packaged goods with inclination angles of ≤30 degrees. Can replace chevron patterns in trench conditions.
Granular pattern
Features: The surface features granular patterns that protrude above or indent into the belt body, which can also be shaped into square, diamond, or weave patterns.
Application: Raised dot pattern is suitable for soft packaging materials or materials requiring gripping during conveyance (such as cardboard boxes) or non-slip conveyance.
The concave pit granular pattern is suitable for conveying granular materials at an inclination angle of ≤45 degrees.
Fanned pattern
Features: The surface features a semi-arc (or 1/4 circular) pattern, which when the tape is formed into a groove, it overlaps to form a fan shape (or semi-circular), classified as a high pattern type.
Application: Suitable for conveying powders, granules, and lump materials at an inclination angle of ≤60 degrees.