R Series Helical Gearbox Reducers are hard tooth helical gear reducers, with all gears made of 20CrMnTi material, carbonitrided for hardness up to 58-62HRC. After gear grinding, precision reaches 6 levels, ensuring reliability and low noise for the reducer. The main transmission parts use imported bearings, and sealing parts are Taiwanese skeleton oil seals. The power range is from 0.09KW to 160KW, with output torque from 20N.M to 14800N.M. The speed ratio ranges from 1.6 to 264 (with a 4-pole motor), available in single, double, or triple stage transmissions (efficiency up to 98%, 96%, and 94% respectively). Lower output speeds can be achieved with 6-pole or 8-pole motors. For even lower speeds, a two-stage reducer combination can be used, offering a wide speed ratio. An infinitely variable speed drive can be added to the input end for further speed variation options. Output types include vertical and horizontal, with solid and hollow shafts (or custom made), allowing installation in various orientations and angles, and capable of forward and reverse operation. The R Series Helical Gearbox Reducers are widely used in food and grain machinery, printing and packaging equipment, multi-story parking equipment, environmental protection machinery, conveying equipment, chemical equipment, metallurgical and mining equipment, iron and steel power equipment, etc. (These products have been used in the market to replace bevel gear pinion reducers to meet higher requirements.) R Series Gearbox Models:
R17、R27、R37、R47、R57、R67、R77、R87、R97、R107、R137、R167
RF17、RF27、RF37、RF47、RF57、RF67、RF77、RF87、RF97、RF107、RF137、RF147、RF167
RX31、RX51、RX61、RX71、RX81、RX91、RX101、RX121、RX151
Product Overview:
1. This series of reducers is manufactured in accordance with international technical requirements, boasting a high level of technological content.
2. Hardened gear reducer saves space, is reliable and durable, has high overload capacity, and power can reach 132KW.
3. Low energy consumption, superior performance; the reducer efficiency exceeds 95%.
4. Low vibration, low noise, and high energy efficiency.
5. The R series helical bevel gear reducer is made of forged steel, features a cast iron housing with high rigidity, and the gear surfaces are heat treated at high frequency.
6. Precision machining ensures shaft parallelism and alignment bearing requirements, resulting in a reducer configuration with bevel gear drive assemblies equipped with various types of motors. This integrates mechanical and electrical engineering, fully guaranteeing the quality characteristics of the reduction motor products.
Performance Features:
1. Smaller offset output, compact structure, optimizes cabinet space; second and third levels housed within the same cabinet.
2. Utilizes an integral cast housing, offering excellent structural rigidity for the housing, which is conducive to enhancing the shaft's strength and extending the bearing life.
3. Installation Methods: Bottom foot installation and flange installation are available with various sizes of flanges, easy to choose from.
4. Solid shaft output with average efficiencies of 96% for Level 2, 94% for Level 3, and 85% for R/R combinations.
5. The RM series, specifically designed for mixing, can withstand greater axial and radial forces.
Technical Specifications:
Speed Ratio Range: R Basic Type 3.33～289.74, RX Type 1.3～8.65, R/R Combination Type up to 27001
Torque Range: R Basic Type 85-18,000 Nm, RX Type 20-1,680 Nm
Power Range: R Basic Model 0.18-160 kW, RX Model 0.18-132 kW
Structural Form:
Axial Extension Foot Mounting RF: Flange Mounting
R…F: Bottom Flange Installation RM: Flange Installation with Extended Bearing Housing
RX: Single-stage Foot Mount RXF: Single-stage Flange Mount
The main models of the R series hard toothed helical gear reducer include:
R/RF17、R/RF27、R/RF37、R/RF47、R/RF57、R/RF67、R/RF77、R/RF87、R/RF97、R/RF107、R/RF137、R/RF147、R/RF167
The R series hard toothed helical bevel gear reducer features primary models including:
RX/RXF37、RX/RXF47、RX/RXF57、RX/RXF67、RX/RXF77、RX/RXF87、RX/RXF97、RX/RXF107、RX/RXF127、RX/RXF157
