Overview:
Electric heating water-cooled rubber belt vulcanizing machine, a specialized equipment for vulcanizing the joints of conveyor belt. Made of lightweight aluminum alloy, this machine is compact, with a light weight, powered by standard three-phase power supply. The heating plate temperature is even, and the water pressure system provides a uniform pressure of (1.0～2.0mpa). It is equipped with a lightweight automatic electric control box, where the connection between the control box and the main unit is completed by a single-piece plug and multi-core cable, offering easy operation and reliable performance. It also features quick temperature rise, even temperature distribution, and high thermal efficiency, making it an ideal vulcanizing equipment for conveyor belt rubber joints.
The quality of the tape joint directly impacts the efficiency and service life of the tape, especially important for long-distance, high-intensity conveyor belts currently.XSDGLJLThe type electric heat vulcanizing tape machine is an indispensable auxiliary equipment in the tape conveying machinery.
Usage:
This product is widely used and suitable for transporting joints of conveyor belts in on-site applications such as metallurgy, chemical industry, metal mines, power plants, ports, and docks. With the technical parameters provided by this machine and the execution of vulcanized belt tensile strength exceeding 90%, not only does the joint have a smooth finish, almost indistinguishable from the original belt, but it also reduces wear on the drums and extends the service life of the conveyor and rubber conveyor belt.
Electric Heating Tape Vulcanizing Machine Technical Parameters
Sulfur Pressure: 1.5 MPa
2. Sulfurizing Temperature: 145℃
3. Sulfur board surface temperature difference: ±3℃
4. Heating time (from room temperature to 145℃) not exceeding 25 minutes.
5. Power Voltage: 380V, 660V, 50Hz
6. Control box output power: 36 Kw
7. Temperature Range: Room temperature to 200℃
8. Timing Adjustment Range: 0-59 min.
9. Upper and lower heating plates pressure: After 0.8mpa, the gap is not greater than 0.5min.
