Product Name: Two-Axis Remote-Controlled Positioning Searchlight

Product Models: FD-AW100WZ, FD-AW500WZ, FD-AW1000WZ

Product Description:

1. Operating Modes: Remote single-point scanning, automatic tracking, manual scanning by operator, network linkage (preset positions available), all modes can be switched or set via the controller.

Remote control point scanning---Control the horizontal and vertical rotation direction, rotation speed, light locking target, etc., of the searchlight through the operation of the controller.

Automatic Path Tracking —— The tracking path and speed can be freely set, and will automatically remember.

Manual Scanning: Switch to this mode, the motor loses power, allowing manual rotation for flexibility in special circumstances.

D: Networked Interlock --- In this mode, searchlights, infrared sensors, and cameras are connected to a single network, controlled by an alarm control unit or computer. Searchlights can be set to preset positions and interlock with infrared sensors and cameras for alarm response. For instance, when an infrared sensor detects an obstacle, it sends a control signal to immediately illuminate the searchlight and automatically scan to the location of the incident, while the camera takes photos. Additionally, we provide an alarm control unit, allowing multiple surveillance searchlights to form a network centered around a remote controller. This enables remote control of the status of each light in the network from within the room.

The searchlight control system features an automatic memory function. The lighting fixture will automatically resume the last operating mode it was in after being powered off.

2. The searchlight is compatible with the international Pelec-D communication protocol.

3. The lamp tube is made of 6063 aluminum for heat dissipation, which enhances the lifespan of the bulb. The lamp body is made of iron with a spray painting process.