BP-8178-B

Lab Blown Film Machine/PLC Control

Extrusion blowing film involves the process of continuously extruding plastic melt through a die under specific temperatures and shear forces, blowing it up with compressed air, cooling it with a wind ring, and then stretching it at variable speeds to obtain a double-folded plastic film.

Single Screw Extruder

Screw Diameter: 20

Length-to-diameter ratio: 1:28

Screw Speed: 0-150 rpm Variable Frequency Drive

Screw Material: 38CrMoAlA Chrome-Molybdenum alloy, surface treated with hardening, nitriding, chrome plating, polishing, and precision grinding, with a roughness Ra≤0.4μm, nitriding layer depth≥0.6mm, hardness HRC55~60.

Barrel Material: 38CrMoAlA chrome molybdenum alloy, surface treated with quenching, nitriding, chrome plating, polishing, and fine grinding, with a roughness Ra≤0.4μm, nitriding layer depth≥0.6mm, hardness HRC55~60

Quick Change Chuck: C-clamp ring connection, easy for rapid connection with downstream equipment

Drive Motor: 2.2KW Precision Gear Reducer Motor

Volume: 1450×500×940 mm (W×D×H) (excluding adjustable electrical control box)

Weight: Approximately 175 kg

Blowing Film Tower

Mold diameter: 30

Blow-up Gas: 0~6bar adjustable compressed air

Cooling Gas: Blower Flow Rate 30 L/min

Axle Roller: 80×L320mm

Reel Diameter: 80×L320mm

Traction unwinding speed: adjustable from 0.5 to 5 m/min

Traction Motor: 90W

Reeling Motor: 3.5 Nm

Fan: 0.25 kW

Observation Box: LED Lighting

Volume: 800×700×2050 (W×D×H) mm

Weight: Approximately 215 kg