Disc Wood Chipper: Composed of blade disc, cutting blades, bottom blade, blade disc blades, etc. The blade disc has grooves for installing cutting blades on the front, arranged at a radial offset of 10° to 15°. The bottom of the blade is padded with a wedge-shaped adjusting block for adjusting the blade extension; a spacing block is installed at the rear for adjusting the compensation length after blade grinding. There are continuous gaps along the direction of the blade edge on the blade disc, where the wood chips produced can be rotated to the other side of the blade disc. The outer edge of the blade disc is uniformly equipped with blades, and the airflow generated by the blades blows the wood chips out of the discharge port, which then goes through a screening process, with oversized chips entering the secondary shredder for further crushing. The machine comes in three types: few blades, many blades, and spiral surface blades. The wood chips cut by the first two types are not very uniform. The spiral surface blade disc chipper, due to the entire cutting surface contacting the blade disc during the cutting process, has a smaller unit pressure, resulting in neat wood chip cuts, fewer wood chips, less wear on the blade disc, consistent length of the cut wood chips, and a qualified cutting rate of about 97%. Trend: The manufacturing of wood chipper machines now focuses on improving the cutting mechanism, blade quality, and mounting methods to reduce grinding and replacement time.

To enhance production efficiency and reduce costs, a significant number of combination and non-standard tools have been utilized. Consequently, failure to provide key cutting tools, particularly non-standard ones, on time will halt the entire production line. Without emergency measures or swift response capabilities, this could lead to the shutdown of assembly lines, even automotive assembly lines.

How is the processing technology for chipper blades?

The function of cutting the whole is to remove chips with the blade edge, and the function of calibrating the whole is to finish the machined surface and guide the machine tool. To accommodate this situation, the machine tool's stationary position will be stationary and use new machine tool materials; stack a higher angle insulating layer on the high-toughness and high-strength matrix, Shandong chipper blades, to better handle the conflict between the angle and strength of the machine tool materials; further stabilize the structure of the machine tool, improve the degree of manufacture, reduce the difference in product quality, and make the operation of the machine tool more automated. The riveting machine tool is to braze the shear blade to the steel blade body; there are two types of machine tool clamps, one is to clamp the blade on the blade body, and the other is to clamp the brazed blade head on the blade body.

What's the difference between bamboo chipper and wood chipper? There are slight differences in the chipping of bamboo and wood: 1. Bamboo has a tough bamboo skin that is difficult to cut, and it tends to produce long fiber strands during chipping. 2. The interior of bamboo is hollow, which provides cushioning during cutting, similar to the principle of cutting cotton with a knife, where it's hard to cut through. 3. Bamboo has hard nodes that exert strong counter-shocks on the blades during cutting, causing the blades to easily chip. After years of repeated research, testing, and customer tracking, we have adopted key technologies such as adjusting the feeding angle, round feeding ports, precise bottom and flying knife gaps, and shock-resistant high-speed steel blades, which improve the cutting effect.




Maanshan Dongfan Machinery (Illustration) - Disc Chipping Machine Blades - Maanshan chipping machine blades are supplied by Maanshan Dongfan Machinery Technology Co., Ltd. Striving for the future, forging ahead. Maanshan Dongfan Machinery Technology Co., Ltd. is committed to becoming a strategic partner that wins together, grows together, and progresses together with you, and is also determined to become a competitive enterprise in cutting tools and fixtures. Let's soar together and achieve success!