Before the wood chip granulator is produced, it is necessary to check the equipment's operation status, look for signs of loose screws in the wood chipper, and ensure that all transmission parts are sensitive; after observing the equipment's smooth operation, make sure there are no abnormalities before starting the motor, processing the粉碎机 blades, and adjusting the working speed. For the control of materials, the moisture content of the wood material must be less than 15% before it can be destroyed.
After the wood chip granulator is operating normally, prevent metal, bricks, and stones from entering the machine. Once there are no doubts about the material and machine operation, start feeding. Feed evenly and steadily, maintain an even feeding rate, and the feed particle size should be based on the hardness of the material. The diameter of hard materials must not exceed three centimeters, and it is strictly prohibited to allow metal lumps into the feed hopper. This allows the power to be fully utilized and prevents material jamming. For the equipment's lubrication, it is essential to schedule lubrication oiling based on the processing frequency to extend the product's lifespan and ensure better processing production. Typically, the main unit grinding bearing is oiled with MoS2 lithium grease every 12 hours, and this wood chipper has eight oiling points.
If the current noise is too loud, the motor cannot start at all, indicating a short circuit in the start capacitor (if the motor coil is shorted, it will need repair). If a discharge spark and a loud "pop" sound can be heard at this point, it means the capacitor is usable; if the spark and sound are faint, it indicates the capacitor's capacity has decreased, and it needs to be replaced or an additional small capacitor added. If the capacitor is already damaged and shorted, this method cannot be used, and it must be replaced with a new one of the same specification to fix it. Another category is the rod mill high-speed pulverizer; these wood pulverizers are generally of good quality and not easily damaged, so regular maintenance becomes more important. Also, the maintenance of these pulverizers is significant, checking the lubrication condition of the bearings is crucial.
Another scenario involves a mushroom wood shredder that does not rotate when powered on. It can be manually turned with external force but emits a faint buzzing sound from the motor, indicating a slight leakage in the starting capacitor. Without a testing instrument, you can first remove the capacitor (4UF/400V), insert each wire into the neutral and live sockets of the household power supply to charge the capacitor, then remove it and short-circuit the wires to discharge.
Longyan Crusher Blades - Crusher Blade Processing - Dongfan Machinery (Recommended Supplier) provided by Maanshan Dongfan Machinery Technology Co., Ltd. Maanshan Dongfan Machinery Technology Co., Ltd. offers services such as "ink blades, bending machine molds, shearing machine blades, round blades," and the company owns the "Dongfan" brand, focusing on industries such as cutting tools and clamps. The company has a good reputation in the Sanyang Industrial Park, Baochang Town, Maanshan City. Welcome to call for inquiries, contact person: Tao Manager.
