1. The vehicle is equipped with a power take-off unit, high-pressure water pump, high-pressure water hose, vacuum sewage pump, used for cleaning and suction; 2. The tank body dimensions are (length of straight section × diameter) (mm): 5400×2150, the tank is divided into two parts, the front section is a clean water tank, length of straight section (mm): 2380; the rear section is a sewage tank, length of straight section (mm): 3020; the effective volume of the water tank: 7.98 cubic meters, the effective volume of the suction tank: 9.98 cubic meters, the water tank and suction tank are two separate tanks, they cannot be fully loaded at the same time, the tank can be lifted; 3. The corresponding relationship between the overall length, front overhang, wheelbase, and rear overhang (mm): 10100/1250 (1450, manufactured by Henan high-pressure cleaning vehicle manufacturer, 1410)/4350+1350/3150 (2950, 2990), 10100/1250 (1450, 1410)/4750+1350/2750 (2550, 2590); 4. The material of the side and rear protective devices: Q235A carbon steel, both side and rear protection are焊接 connected, the cross-sectional dimensions of the rear protective device (mm): 50×280, the height of the rear protective device from the ground: 470mm; 5. Optional cab with the chassis, optional accessories installation location with the chassis; 6. The ABS model and manufacturer: 3631010-C2000/Dongke Kogel Commercial Vehicle Braking System (Shiyan) Co., Ltd., Henan high-pressure cleaning vehicle manufacturer, J ABS/Jiaozuo Borike Control Technology Co., Ltd.; 7. Optional vehicle rear view. Dongfeng D9 Yuchai 200HP chassis high-pressure cleaning vehicle. Henan high-pressure cleaning vehicle manufacturer.
Automotive manufacturing资质 enterprise; partner to随州 automotive undercarriage manufacturers such as Dongfeng, Jiefang, Foton, Zhengzhou Heavy Industry, Shaanxi Automotive, Deyun, Kaima, Shifeng, etc.; Suizhou, the automotive capital of China,改装 base. Produces and sells a variety of sanitation vehicles and equipment, including garbage trucks (hook-lift, compactor, arm,对接, wing, dump, sealed, self-loading, barrel-lift garbage trucks);污泥 suction trucks, feces suction trucks, cleaning suction trucks, wastewater treatment trucks, wastewater purification trucks, combined drain cleaners, sprinkler trucks, spraying trucks, fog cannons, road sweeper trucks) and auto spare parts. How much water can a 40 cubic meter high-pressure cleaner produced by a Henan manufacturer hold?
Water tank trucks equipped with high-pressure water pumps, used for cleaning sediment in urban sewers and unblocking drains. They can also be used for cleaning industrial effluent pipelines and walls, as well as for sprinkling, transporting water, and highway flushing. They can be used for firefighting in emergencies. The principle of the cleaning vehicle is to rotate a flexible steel wire with a bend into the blocked drain, removing debris like rags and hair. There is also a tool called a "single shot opener," a pressure疏通 tool that uses high-pressure principles to clear blocked drains. The principle of the common leather foot in daily life is similar, using force to unblock pipes. The pipe cleaners used for industrial pipeline unblocking vary greatly depending on the pipe size, with those below 100MM being similar to residential drain unblocking. The high-pressure cleaning trucks are based on the second-class original chassis, with the upper part being the tank body and equipped with a high-pressure water pump. Our company supplies various models of mobile three-wheeled vehicles and Dongfeng series cleaning vehicles. Manufacturers, support customization, welcome to inquire and negotiate.
Operation Instructions: 1) Maintain the vacuum pump at an appropriate speed. Excessive speed causes the rotor to overheat; insufficient speed leads to additional shock in the pump and components, affecting their lifespan. To achieve the optimal operating speed, pre-adjust the hand throttle to the best position according to the pump type. 2) Unload the tank on a flat surface; unloading on an inclined surface can distort and deform the components, causing malfunctions and potentially leading to rollover accidents. 3) When unloading the tank, open the tank body first, then the rear door: before unloading the sludge, loosen the locking bolts, lift the rear door to the required angle. It is prohibited to lift the tank when it is full and the rear door is closed, as this poses a rollover risk. 4) When drawing power from the oil pump and vacuum pump, the engine should be at idle, and the clutch pedal should be fully pressed. After turning on the draw-off switch, release the clutch pedal slowly. 5) When the vehicle is in motion, the vacuum pump and oil pump should be in the off state. 6) Do not allow the vehicle to intake materials larger than the hose diameter, transport waste oil, or hazardous materials. 7) When lifting the tank for unloading or inspection, use support rods and blocks. 8) When transporting sludge, the vehicle must travel at medium and slow speeds, avoiding sharp turns and sudden braking due to the high center of gravity and the absence of shock absorbers in the tank. 5-8 cubic meters high-pressure cleaning vacuum truck configuration.
Sewer trucks are primarily composed of a vehicle chassis, tank body, and suction equipment. Common models include Dongfeng Fureka, Dongfeng Doli Ka, 140, 145, rear double-axle, and rear eight-axle types. The components of a sewer truck include an oil-water separator, air-water separator, vacuum suction pump, volume pressure gauge, pipeline system, suction hose, automatic flow valve, vacuum tank body, manhole cover (suction window), and fully automatic overflow prevention valve. The fecal suction truck is mainly used for cleaning and sanitation work in environments such as septic tanks, sewage ditches, and sewers, and is known along with water-spraying trucks and garbage trucks as the three major sanitation vehicle types. For a long time, these vehicles have been supported by relevant policies and care, and no purchase tax is required. What are the differences between high-pressure cleaning trucks, sludge suction trucks, and fecal suction trucks? Henan manufacturers produce high-pressure cleaning trucks.
Which is better, a high-pressure cleaning truck or a sewage suction truck? Henan manufacturer of high-pressure cleaning trucks.
Sewer cleaner installation: Use suitable brackets, angle irons, and clamps to mount the pump under the car's frame. The pump's position in terms of height, width, and depth is determined by the power take-off output shaft centerline, ensuring it is as close as possible to the power take-off and beam without interfering with the car's frame components. The connection between the pump shaft and the power take-off output shaft must not exceed 7 degrees of tilt. The suction port system pipeline must not leak, otherwise it will affect the vacuum level. The exhaust pipe should also be leak-free to prevent the oil from escaping and contaminating the environment, wasting energy. As this pump is an oil-sealed pump, it must maintain sufficient N32 mechanical oil during normal operation. In cold seasons in the northeast and northwest regions, use 32-degree refrigerated oil. The oil serves as a sealant and lubricant, but some oil inside the pump may be carried out during exhaust. Therefore, it is necessary to install a primary and secondary oil-gas separator at the exhaust port to ensure thorough separation of oil and gas. Recycle the oil for pump use and discharge the gas into the atmosphere for smooth operation, non-contamination, and energy saving. Folded precautions: Correct installation, use, and maintenance of the sewer cleaner vacuum pump should include: 1. The pipeline must not have any air leakage, otherwise the sewer cleaner will not function. 2. The large tank of the sewer cleaner must be equipped with a prevention overflow device to avoid easily drawing feces and wastewater into the vacuum pump during use, which can damage the entire system. 3. The return oil port of the primary oil-gas separator and the return oil port of the secondary oil-gas separator on the sewer cleaner, as well as the suction oil pipe, must be connected with rigid pipes or rigid oil-resistant rubber hoses (steel wire braided hoses), and plastic pipes that deform when heated are not allowed. 4. When using a new pump, 1-2 liters of N32 mechanical oil should be directly added to the pump. Henan manufacturer producing high-pressure cleaning trucks manufacturer
Chengli Automotive Co., Ltd. is a high-tech enterprise in the transportation sector, with a strong technical force. As a corporation, it has partnered with multiple companies for research and development, continuously improving existing products and pursuing innovation. While strengthening internal management and optimizing the structure, the company is renowned for its high-quality, reasonable pricing, and comprehensive services. Chengli Group has consistently prioritized customer needs, committed to providing high-quality animal husbandry transportation vehicles, water trucks, garbage trucks, and oil tankers. With a philosophy of sincere service, innovative thinking, and top-quality products, Chengli Group aims to create a new and promising future for both parties!
