Anhui Qidao Intelligent Door Industry Co., Ltd. (Factory Steel Door)
Uniformly adopted 0.4KN/Door leaf deformation not exceeding at ㎡δ=0.4Insulation board thicknessδ=0.6 mmColor-coated corrugated steel panels, both the panels and backboards are made of color-coated corrugated steel. The color and pattern of the panels and backboards are supplied according to the market, and are selected by the customer. Power: The power is supplied by a reducer motor, installed on the door body, moving with the door. Power rating is generally selected~1.1Kilowatts, depending on the door weight, extra-large doors can use dual power units. Control: The control system employs variable frequency control, allowing for a smooth start and stop of the door movement. The speed of the middle section can be adjusted, generally controlled at: 1Infrared Detection Device: The door will automatically stop moving when an obstacle passes through the door opening during door movement. 3Emergency Stop Switch: An emergency stop switch is installed on the control box. In case of an emergency, pressing the emergency stop switch will immediately halt the movement of the moving door.



































