Product Introduction
The flushing equipment is designed for tires and undercarriages of various engineering vehicles, based on the requirements of municipal, construction, environmental, and transportation departments. It uses multi-directional high-pressure water to thoroughly clean the tires and undercarriages, meeting the roadworthiness standards set by these departments. The flushing machine features three control methods: mechanical automatic sensing, remote control, and manual operation, allowing for automatic cleaning. The water used for flushing can be recycled, requiring only a small water supplement during continuous operation, thus saving a significant amount of water resources. Particularly suitable for cleaning incoming and outgoing vehicles at construction sites, mining facilities, cement product factories, coal mines, power plants, landfill sites, and upscale communities, ensuring a dust-free environment and high-quality projects.
Equipment Dimensions: 2300×3700×1000 (Length×Width×Height)
3700×3700×1000 (Length x Width x Height)
Washing Method Vehicle Self-Cleaning
Cleaning Options: Mechanical Inductive / Photoelectric Inductive
Washing Pressure: 3-5 kg/cm²
Power Supply: Three-phase 380V 50Hz
Water Supply DN25
Water Consumption / Recycled Water
Car Wash Speed: 20-60 seconds per vehicle
Total Power: 11KW
Equipment Weight: 2000 kg
Applicable Vehicles: Construction vehicles under 100 tons and other vehicles
Key Features of Engineering Vehicle Automatic Wash Wheels Machine:
1. Fully automatic cleaning, no manual operation required.
2. Short cleaning time, complete in 50 seconds.
3. Energy-saving and environmentally friendly water recycling, conserving water usage.
4. The equipment is robust and durable with a long service life, allowing for easy relocation at any time.
5. Easy transportation and installation, ready for use in 2 hours.
Washing engineering transport vehicles
* Pollution from engineering vehicles on urban roads
*Unique design, classic style
*Optional Automatic Sludge Discharge* Rust-resistant treatment, durable and long-lasting* Recycled Water System, saving a significant amount of water resources* Adaptable to various construction sites, easy to relocate.
Automatic Car Wash Equipment, Dust Suppression Fogger for Construction Sites, Tower Crane/Curtain Wall Sprinkler System, Dust Monitoring Instrument
High-pressure washers, sweeping vehicles, floor scrubbers, industrial vacuum cleaners, construction wheel washers
Construction site washers have become essential equipment on construction sites in recent years. With smoggy weather becoming a common issue across China, an internet meme goes like this: "The distance isn't just between life and death, but I'm holding your hand on the streets of Shanghai and can't see your face." So, how does the Shenzhen Fuda site washer improve our living environment? In the face of severe smog, while there's no direct way to drive it away, we can start by controlling dust and treating it. Gradually, we can prevent smog from appearing easily. With the Shenzhen Fuda site washer, many pollution issues during construction can be easily resolved. As we explore the path of civilization, we gradually realize that environmental protection must always be a top priority, and we must remain vigilant against pollution. Many cities are suffering from pollution, so environmental governance cannot be relaxed at any moment. This is to address the difficulty of渣土车 (construction site dump trucks) carrying construction waste out of the site.
.Washing facility standards: Each construction site should connect water pipes at the washing station and be equipped with high-pressure water equipment with a pressure of not less than 8MPa, and the length of the water connection pipe should not be less than 10 meters. 3. Staff allocation: In addition to security guards at the gates, each construction site should be equipped with at least 2 full-time staff members based on the transportation vehicle entry and exit situation, mainly responsible for washing vehicles leaving the construction site. Technical parameters of the washing wheel machine: 1. Sequence Name Unit Value 1 Power supply system rated voltage VAC 380 2 Power supply system rated current A 20 3 Power supply system rated power KW 5.54 4 Vehicle type and load capacity 100T and below various construction vehicles 5 Washing pressure Kg/cm2 Greater than 46 6 Washing time s 1-60 (adjustable) 7 Water consumption per vehicle L Less than 5 (recirculation 8 Equipment size (. Second, staff training plan To ensure the normal operation of the equipment, training for users is crucial; it is an indispensable part of equipment operation. For the use of this equipment, we adopt the following training plan: a) Equipment usage content: working principle, equipment structure; Object: staff b) Equipment interior.
