The machine is suitable for loading and unloading at storage platforms and postal hubs. It can be adjusted to different heights of truck trailers, both elevated and lowered, facilitating easy access for forklifts and smooth operations. It features guardrails on both sides for enhanced safety. Forklifts and other handling vehicles can directly enter the truck through a ramp for bulk loading and unloading, requiring only one person to operate, achieving fast loading and unloading. This reduces labor costs significantly, boosts work efficiency, and yields greater economic benefits for the enterprise.
Product Advantages: Electric hydraulic, easy operation, height adjustable to any level, wide adjustment range, enhances loading and unloading efficiency, saves labor.
Applicable locations: Large enterprises with frequent vehicle loading and unloading, various vehicle types, warehouses, stations, docks, storage and logistics bases, postal transportation, and logistics distribution.
 

Note: Custom design and manufacturing according to customer requirements.

Suitable for loading and unloading at storage platforms and postal hubs, it can be adjusted to different heights of truck trailers, both elevated and lowered, for easy access by forklifts and smooth operations. With guardrails on both sides, it ensures enhanced safety. Forklifts and other transport vehicles can directly enter the truck interior via a loading bridge for bulk loading and unloading, requiring only one person to operate, achieving rapid handling of goods. This solution helps businesses reduce labor costs significantly, boost work efficiency, and achieve greater economic benefits.

Instructions for the Use of Fixed Hydraulic Boarding Bridge:
1. Move the boarding bridge to the work location, close the manual pump's shut-off valve, and press the hand pump to elevate the bridge deck to an appropriate height (adjust according to the vehicle type).
2. The truck slowly backs down to under the bridge (with the tongue plate stiffener not interfering as a guide).
3. Open the manual pump shut-off valve to allow the bridge deck to freely abut the carriage, ensuring the wheels do not bear any load.
4. Lower the stern board, secure the bridge to the vehicle body with the locking chain, and then proceed with loading and unloading operations.
5. Upon completion, release the chain, press the manual pump to disengage the bridge from the vehicle body, and the truck can depart.
6. Retract the rear deck and remove the boarding bridge.