Detailed Information

Lifting Height: 4-18M
Load Capacity: 300-1000 kg
Workbench Surface: 3210*1600MM
Dimensions: 3890*2120*3250

* The telescopic boom lift platforms are divided into series with lifting heights of 4, 6, 8, 10, 12, 14, and 16 meters.
Available with power options including 380V, 220V, battery, and diesel for lifting, explosion-proof motors and electrical equipment can be chosen for special environments.
This series of products can be moved by a tractor or manpower.
The lifting mechanism is made of high-strength rectangular tubes, featuring an aesthetically pleasing design, flexible movement, simple operation, high load-bearing capacity, smooth lifting, and is safe and reliable, allowing for simultaneous operation by multiple people.
The scissor lift aerial work platform features up-and-down control for lifting and lowering, equipped with a safety valve to prevent hydraulic pipeline rupture, allowing normal descent during power outages, ensuring safer and more efficient high-altitude operations.
*Equipped with two control systems (optional): one handheld button, which can be placed at any position on the countertop railing for ease of operation; the other is fixed to the electrical control box and features an emergency stop button to prevent sudden accidents.
 

Note: Custom design and manufacturing available based on customer requirements.

Applicable Locations: Construction sites, factories, warehouses, grain silos, stations, hotels, airports, docks, gas stations, stadiums, power facilities, elevated pipelines, etc. - for installation, maintenance, and cleaning of high-altitude equipment. Also used for maintenance of lifting equipment, outdoor power facilities, and steel frame factory structures; a great choice for your high-altitude operations.

Product Applications
Applicable Sites: Construction sites, factories, warehouses, grain silos, stations, hotels, airports, docks, gas stations, sports stadiums, power plants, elevated pipelines, and other high-altitude equipment installation, maintenance, and cleaning. Also used for maintenance of lifting equipment, field power facilities, and steel frame factory structures; a great choice for your high-altitude operations.

Usage Instructions:
1. The hydraulic lifting platforms (hereinafter referred to as the "platforms") are all inspected and adjusted before shipment, with all technical specifications meeting the design requirements. Simply connect the ground wire when in use, and no adjustments are needed for the hydraulic and electrical systems.
2. Ensure the hydraulic and electrical systems are free of leaks or exposed parts before using the platform.
3. When in use, the four legs of the platform should be firmly supported on a solid surface (as the walking wheels are about to leave the ground), and sleepers may be used if necessary.
4. The platform must be operated empty for 1-3 times before it can be loaded for work.
5. The center of gravity should be as close to the center of the workbench as possible.
6. The swinging doors at both ends of the guardrail should be securely closed and locked before operation.
7. Hydraulic Control System
Operation Process: First, turn on the motor start switch, the motor rotates, the gear pump starts oiling, the cylinder extends, and the platform lifts. Once it reaches the required working height, press the motor stop button, the platform stops lifting and lowering, and you can begin work. For lowering, press the solenoid activation button; at this point, the cylinder returns oil, and the platform descends by its own weight. After descending to the original position, turn off the solenoid (disconnect power).

Cautionary Notes:
1. While using the platform, the work surface should remain level.
2. When working outdoors, safety belts should be worn on platforms over five meters high.
3. During the lifting or lowering process of the platform, it is strictly prohibited for personnel to climb. If maintenance is required, securely fasten the top of the platform after it is lifted before proceeding.
4. Once the platform is elevated, it must not be moved. The lift operation is not to be performed if the four support legs are not securely fastened.
5. No overloading is allowed during platform operation. Items must be securely placed on the work surface and must not be moved.
6. The hydraulic oil used should remain clean and free from water and other impurities. It is generally recommended to change it every six months. During winter, use N32 hydraulic oil; during summer, use N46 hydraulic oil.
7. In case of platform failure, promptly disconnect the power source for maintenance.