Our company produces filtration equipment, oil purifiers, wastewater purification and emissions reduction systems, equipment rental, and offers free trial upon sample request.
Phone: Xu (180-1774-6299)
SYJJ-XX-QZ Automatic Discharging Centrifugal Oil Filter Machine
1. Filter without a filter, saving you a substantial amount of consumable costs.
2. High-tech potential separation technology and essential elements for effectively removing oil contamination—moisture.
3. Rapidly separates and discharges metal and other solid particles from oil, recycling waste sources.
4. PLC control system, intelligent and advanced.
Applicable Oils:
Copper drawing oil, aluminum drawing oil, screw forming oil, spark oil, stainless steel drawing oil, quenching oil, screw and nut forming oil, hydraulic machinery oil, heavy-duty gear oil, high viscosity oil, turbine oil, lubricating oil, etc.
Operating Principle:
The oil passes through a security filter (optional) attached to the pump, then is subjected to a dynamic discharge at a specific frequency and intensity. All pollutants in the oil are then charged and enter the potential separation chamber. Our company's potential balance technology is applied in the chamber, attracting positive and negative particles to each other and causing them to grow larger. The larger particles are collected in the separator drum and automatically discharged when the collection volume is reached. Similarly, a small amount of water is also coalesced and grows larger. When it reaches its critical point, the water is separated by gravity and collected at the drain, which can be manually removed or automatically removed based on a detection signal (optional).
Main Technical Parameters of SYJJ Automatic Discharge Centrifugal Oil Filter Machine:
Model | SYJJ-40-QZ | SYJJ-80-QZ | SYJJ-120-QZ | |
Application Scope | Bar oil and hydraulic oil for machinery | |||
Filter Precision | ≥0.01 micron | |||
Traffic | 25L/min | 50L/min | 75L/min | |
Operating Temperature Range | 0℃-120℃ | |||
Utilize viscosity range | 9-460cst | |||
Inches of inside and outside diameter | Enter RC3/4, exit RC2 | RC2 | ||
Pressure gauge | Oil-filled pressure gauge, 60mm diameter, 0-10 kgf/cm²2 | |||
Weight | - | |||
Applicable Fuel Tank Capacity | 5000L or less | 10,000L or less | 20,000L or less | |








































