Common glazed tile components like tube tiles and flat tiles are extruded using an extruder (TCL350 vacuum extruder). This machine is fitted with a die of the same size as the brick body at the outlet of the mud mixer. After the bricks are extruded, they are cut into tile blanks with steel wires, then dried on racks, trimmed, dried, and finally fired. Western-style glazed tiles use melt glaze, which offers a wide range of firing temperatures and color glaze options. The chemical raw materials (borax, soda ash, red lead, etc.) used in the melt preparation should be industrial purity, and the purity of the coloring agents should be high. The quality of the melt directly affects the glaze surface quality, so attention should be given to all stages of firing and the quality of the melt should be improved. Good