The ATec M1H High-Precision Stackable Large-Capacity Oscillating Incubator (with Active Humidity Control) is a high-precision oscillating incubator launched by RunDu Biotechnology in response to the market's high standards and demands. This product integrates numerous advantages of the company's offerings. It provides a perfect solution with high-precision temperature control, active humidity control, and an intelligent touch control system, tailored to the specific requirements of biological culture. The ATec M1H is suitable for insect cell culture and small-scale cultivation of various special microorganisms.

Product Advantages:

7-inch LCD touch control screen, simple, intuitive, and easy to operate

▸ 7-inch touch control panel is intuitive and easy to operate, allowing for easy control of parameters without the need for specialized training, including turning them on/off and adjusting their values

▸ Can be set with multi-section programs, allowing different parameters such as temperature, speed, concentration, and time for culture, with automatic and seamless switching between programs; can check any parameters or historical data curves of the culture process at any time.

▸ Perfect appearance, displaying temperature and RPM on the display area. With the enlarged numbers and clear symbols on the display, you can observe from a distance. Each function on the buttons is assigned a different color, making operation more convenient.

▸ Settable screen unlock control password provides experimental security for public lab users, preventing accidental operation from stopping ongoing experiments.

▸ Comfortable remote control function, intelligent remote control allows for easier manipulation of incubator parameters

Active humidity control function, capable of maintaining humidity at 85% r.h., with the evaporation rate of the微量culture liquid kept under 10% per week.

▸ RADOBIO's integrated humidification and humidity control module uses a stainless steel heating plate for humidification, ensuring stable and reliable humidity control while avoiding the drawbacks of traditional humidification methods.

▸ If humidity is required, the water inlet solenoid valve will automatically open, and the high-temperature heating plate will quickly vaporize water into molecular water vapor while sterilizing, utilizing its own volume expansion to enter the incubator and rapidly spread throughout the entire incubator via the internal circulation system.

▸ Due to the fact that liquid water is completely vaporized into free water molecules at high temperatures, water vapor is not easy to condense in the incubator, achieving a better humidification effect and avoiding the drawback of traditional ultrasonic humidifiers where water vapor tends to condense a second time.

▸ High-temperature humidification simultaneously acts as a sterilizer, avoiding the disadvantage of traditional humidification, where bacteria can easily grow in the water tray, leading to contamination.

Slide-out blackout curtains for easy operation and light-blocking (optional)

▸ For photosensitive media or organisms, cultivation can be conducted by drawing the light-blocking curtain. The sliding light-blocking curtain prevents sunlight (UV radiation) from entering the incubator, while still allowing convenient observation of the internal cultivation situation.

The blackout curtain is positioned between the glass window and the outer box panel, offering both convenience and aesthetics, perfectly resolving the awkwardness of sticking foil paper.

Intelligent remote monitoring feature, with remote control operation and real-time machine status viewing (optional)

▸ Smart remote control for easy parameter adjustment of the incubator

Double-glazed door, ensuring excellent thermal insulation and safety.

Double-layered safety glass door with excellent thermal insulation properties

Door heating function effectively prevents fogging on glass doors, allowing for continuous observation of cell culture conditions.

▸ The door heating function effectively prevents condensation on glass windows, allowing for excellent observation of the internal shaker bottles even when there is a significant difference in internal and external temperatures.

Triple sterilization system, with superior sterilization effectiveness

▸ Multiple UV sterilization units ensure effective sterilization in every corner of the cabin. The UV sterilization units can be turned on during rest periods. The door switch ensures the automatic shutdown of the UV lights when the door is opened (optional).

Odorless, eco-friendly adhesive board material, creating a comfortable working environment

▸ Eco-friendly, odorless adhesive sheets; freely combine and paste according to the size of the shake plate. Various sizes of culture bottles can be directly fixed on the adhesive board without the need for clamps, and it is convenient for cleaning. Easy to operate, enhancing space utilization. The adhesive board is suitable for various common UV sterilization methods. When dirt accumulates on the surface of the adhesive sheet after use, it can be removed, washed with water, and reused; water splashed on the surface of the adhesive board will not affect its adhesiveness, and it can be used normally.

Full stainless steel drawn wire arc roundness angle integral cavity, aesthetically pleasing and easy to clean

▸ Waterproof design for the housing, all components sensitive to water or mist, including the drive motor and electronic parts, are all placed outside the housing, allowing the incubator to cultivate in high-temperature and high-humidity environments.

During the cultivation process, any accidental broken bottles will not cause damage to the incubator. The bottom of the cabinet can be directly hosed down for cleaning, or thoroughly cleaned with detergents and sterilizers to maintain a sterile environment inside. The bottom liquid outlet can easily release cleaning fluids, and the cabinet can be completely sealed after the cleaning is done.

The machine operates nearly silent, with no abnormal vibration during the high-speed operation of multiple layers stacked.

▸ Features unique bearing technology, stable startup, almost noiseless operation, and no abnormal vibration even when stacked in multiple layers.

The machine operates stably with a longer service life.

Integrated molding fixture, stable and durable, effectively preventing unsafe incidents caused by fixture breakage.

▸ Clamps are directly cut and shaped from solid stainless steel sheets, ensuring stability and durability with no risk of breakage, effectively preventing unsafe incidents such as clamp breakage and bottles being ejected.

▸ The fixed arm of the stainless steel fixture is sealed, preventing user injury and reducing friction with the shaker, offering a quieter experience.

No-heat waterproof fan, significantly reduces background heat, saves energy

Compared to traditional fans, the heat-free waterproof fan ensures more uniform and stable cabin temperatures, while effectively reducing background heat. It offers a wider range of cultivation temperatures without the need for the refrigeration system, thus saving energy consumption.

Sliding brushed chrome-plated aluminum alloy trolley, easily accommodates culture containers

▸ The 8mm thick aluminum alloy shake plate is lighter and stronger, with a beautiful and generous brushed chrome finish, and is easy to clean.

▸ Sliding design for easy placement of culture containers at specific heights and spaces

Flexible arrangement, stackable for efficient space-saving in laboratories

▸ Can be used as a single-tier floor-standing or countertop unit, or stacked in two or three layers. When stacked three layers high, the top tray is only 1.3 meters above the ground, allowing experimenters to easily operate.

▸ A system that scales with the task; when the cultivation capacity is no longer sufficient, it requires no additional floor space—simply stack up to 3 levels without further installation. Each stacked shaking incubator operates independently, offering different cultivation conditions.

Triple safety design ensures the safety of the operator and the sample.

Optimized PID parameter settings to avoid overshoot in temperature during the heating and cooling process

▸ Fully optimized oscillation system and balancing system, ensuring no unnecessary vibrations during high-speed oscillation

▸ In the event of a power outage, the shaker will remember the user's set parameters and automatically restart according to the original settings upon power return, while also automatically prompting the operator about the unexpected situation that occurred.

▸ If the user opens the hatch during operation, the shaker oscillating plate will automatically engage a soft brake until the oscillation stops completely. When closing the hatch, the shaker oscillating plate will automatically initiate a soft start until it reaches the preset oscillation speed, preventing any unsafe incidents caused by sudden speed increases.

▸ When a parameter significantly deviates from the set value, the automatic sound and light alarm system is activated.

▸ Equipped with a data export USB port on the side, allowing for easy export of backup data, ensuring convenient and secure data storage.