Domestic packaging industry primarily consists of two categories: food packaging materials and industrial packaging materials.

Let's start with food packaging. The primary focus is on the aesthetics of the packaging, followed by its practicality. For packaged foods, sealability is particularly crucial. This is where our packaging testing equipment shines. Of course, food packaging isn't just about safety testing; it also involves assessing the item's resistance. These are functionalities that packaging testing equipment should possess.

Basic Functions: 1. Stores test information on a USB drive or transmits it to a computer via an Ethernet cable. It features built-in storage with a capacity of up to 100,000 entries. 2. Equipped with input/output interfaces for connecting peripheral execution units (or PLCs); it facilitates automated air tightness and waterproof testing. It has excellent compatibility with automated production lines. 3. Features the exclusive SI2.0 algorithm, which, combined with hardware support, ensures Zhejiang waterproof testing can effectively counteract the impact of environmental changes on testing accuracy, such as temperature, humidity, atmospheric pressure, gas density, and other unpredictable factors.

How to operate the密封test instrument: 1. Installation and tuning, 1. Place the acrylic glass cylinder on the instrument cabinet. 2. Connect a stable compressed air source to the "compressed air" intake pipe of the密封test instrument (located on the left rear end of the base) for waterproof testing in bulk, and connect the vacuum output (on the right rear end of the base) and the quick connector on the acrylic glass cylinder. 3. Fill the cylinder with a certain amount of clean water, up to about 10mm above the pressure plate surface (but do not allow the water to be suctioned out after adding the test sample). 4. Close the sealing cover of the acrylic glass cylinder, turn the switch on the密封test instrument to the "on" position, and adjust the control knob of the instrument. First, ensure the knob is locked (i.e., pressed down), for waterproof testing supply. If locked, slightly pull the knob up first when adjusting, then rotate to fine-tune, and observe the vacuum pressure gauge, adjusting the pressure to the desired level. Turn the switch on the instrument to the "off" position to close the air path, start pressure holding, and start timing. Press the knob down to fix the position once the desired stable pressure is achieved. 5. After completion, turn the switch on the密封test instrument to the "on" position, open the sealing cover to remove the sample, place the next set of samples, and start the next test.

Waterproof Testing Wholesale - Innotek Technology Co., Ltd. - Jiaxing Waterproof Testing provided by Innotek Testing Equipment (Taicang) Co., Ltd. Innotek Testing Equipment (Taicang) Co., Ltd. is a company specializing in "leak detectors, quick connectors, and airtightness testers." The company adheres to the philosophy of "honest business operations and dedicated service" to offer you superior products and services. Welcome to call for inquiries! Contact: Li Huaizhou.