Dimensions (Length x Width x Height): 5750mm (including 750mm water tank) x 750mm x 760mm; one side of the countertop features a drawer and a single door, while the other side is open; a sink is installed on one side (or both sides, depending on actual installation requirements) of the lab table; a top cabinet is mounted on the top of the lab table as per requirements; countertop in blue, cabinet doors in blue, cabinet body in gray. All components meet top-grade standards; complete with transportation, installation, and commissioning.
2. Benchtop Requirements: Laboratory benchtops are made of 12.7mm solid-core chemical board, with the edges doubled-up using 12.7mm chemical board to reach 25.4mm thickness, ensuring a sturdy and dense structure, odorless, and with excellent chemical resistance.
3. The structural part requires a steel frame structure and must meet the following technical parameter specifications:
3.1 Vertical Frame: Constructed with 40×60δ1.5mm C-shaped steel, connected by cold-rolled steel plate stamped一体成型 connectors, ensuring a rational overall frame structure with exceptional load-bearing capacity and stability of the entire unit; the steel surface is treated with acid pickling, phosphatization, and electrostatic powder coating, offering corrosion resistance, fireproofing, and moisture-proof properties. Good load-bearing performance and long service life.
3.2 Beams: Front, rear, top, and bottom beams are made of 40*60*1.5mm square steel sections, secured to the vertical frame via screws or bolts through connecting parts.
3.3 Connectors: Made from 2mm thick die-cast steel plate, triangular 90-degree fixed plates are used for the connection and fastening of various components, with surface anti-corrosion electroplating treatment (yellow zinc plating).
4. Cabinet Requirements:
(1) Steel and wood construction, countertop made of 12.7mm thick solid core "Weishengya" melamine board, H-shaped steel frame formed by welding 40*60*1.5mm square steel tubes; (2) Cabinet doors made of 15mm and 18mm "Furen" brand E1 grade high-density board, all edges rounded for smoothness; (3) Imported from Germany, "BMB" damping three-section rail and "BMB" durable stainless steel 105-degree door hinges; (4) Equipment: main desk + small cabinet + aluminum alloy cable channel.
(1) Side panels and shelves are made of 25mm thick "Standard" brand wood grain particleboard, with the rest being 16mm thick; (2) Upper cabinet features a 5mm thick tempered glass sliding door; (3) Edging: 2.0mm thick PVC dual-color anti-collision edging; (4) Hardware accessories: German imported "BMB" damping three-section track, "BMB" damping hinges and locks, with over 50,000 opening and closing cycles; one-piece aluminum alloy edging pull handle; (5) Configuration: Lower cabinet with double-drawer double-door + upper cabinet with four drawers.
(1) Side panels and shelves are made of 25mm thick "Standard" brand wood grain particleboard, with the rest being 16mm thick; (2) Top cabinet features a 5mm thick tempered glass sliding door; (3) Edging: 2.0mm thick PVC dual-color anti-collision edging used; (4) Hardware accessories: Imported German "BMB" damping three-section tracks, "BMB" damping hinges, and locks with over 50,000 opening and closing cycles; one-piece aluminum alloy edging pull handles; (5) Configuration: Lower cabinet with double-drawer double doors + top cabinet with four drawers.

Pricy, with particularly high costs.
Imported from Germany, Made in Rongde
Epoxy Resin - Made by mixing and baking epoxy resin, quartz sand, catalyst, hardener, and pigments, etc. ① Resists laboratory high temperatures (up to 600℃) and corrosion from common chemicals, is resistant to contamination, and is safe and reliable. ② Contains no paper components, effectively resists moisture in the air, especially suitable for splash zones on workstations, without concerns of surface deformation or deterioration. ③ Monolithic, homogenous material with no delamination, expansion, or cracking; scratches can be sanded and repaired.

Complete lifting system: The entire system is configured with waste liquid recovery containers that meet various height requirements, designed with ergonomics in mind.
Free adjustable height lifting system with wall-mounted handheld controller, lifting range ≥ 400mm. Must ensure waste
The liquid discharge orifice height is raised to ≥650mm above ground, facilitating the recovery of the liquid and its subsequent flushing, and the elimination of common fixed tanks.
Safety hazards of manual pouring of fixed liquids.
*2. Material and Manufacturing Process: Overall made of SUS316# stainless steel with a thickness of ≥2mm, formed by stainless steel mold stamping.
Resistant to corrosion from strong alkalis and acids, and impact-resistant. The countertop must be a single piece of stainless steel sheet, featuring an integrated waterproof rim design.
No splicing or welding required, meets modern laboratory biosecurity needs.
3. Specimen Fixation Vessel: The vessel features adjustable and combinable specimen fixation plates, odorless, and made of biocompatible materials.
Safety requirements, easy for fixing and storing specimens of various sizes, allowing for quick and convenient retrieval and examination, equipped with
Fixed cylinder sealing cap, prevents the volatilization and diffusion of fixed liquid odor, equipped with waste liquid recovery and flushing at the bottom.
Interface.
4. Fixed Liquid Recovery Diversion Device: Each specimen fixing tank is equipped with a standing switch valve, the terminal of the drain outlet is fitted with a main valve for easy individual operation and centralized discharge, and an expandable and elastic conduit for the diversion flow is installed at the terminal of the drain outlet.
Material: The entire cabinet is made of 1.0mm thick galvanized steel plate, with the surface coated in epoxy resin powder by electrostatic spray, high-temperature cured, high adhesion, scratch-resistant, acid and alkali-resistant, and aesthetically pleasing and durable.
2. Accessories:
Track: 16-inch track, quiet and smooth.
Hinge: Uses a hinge, opens to 115 degrees.
Adjustable Foot: φ8mm diameter, with an external hex nylon base, total height of 25mm, adjustable height of 15mm.
Handle: One-letter type integrated with the door, formed by bending with hydraulic pressure.
3. Processing Technology:
Material cutting: Utilizing a 2000W CNC fiber laser cutting machine imported from Germany, high speed, quick material cutting, and minimal tolerance.
Bending: Fully automatic CNC bending with robotic operation, high precision, minimal error.
Welding: Spot welding and TIG welding.
Spraying: Fully automatic spray booth, imported Wagner sprayer, conveyorized curing oven.
4. Cabinet Structure:
Each unit features a detachable structure, compact packaging, easy handling before installation, and a small size that avoids obstacles in laboratory corridors and stairs, making it easy to ascend and quick to move.
5. Assembly:
A wide range of specifications and flexible combinations allow for assembling the required lab tables (side or central) according to room size. Optional hanging cabinets are available, with cabinets ranging from 300mm single door cabinets to 1000mm double door double drawer cabinets, featuring a cabinet unit every 25mm. Additionally, we offer seating with drawers, seating with keyboard racks, and empty seats.
6. Color:
The cabinet features a mainstream fashionable gray, with the skirting board color being dark gray, closely matching the room's skirting board.
7. Face Plate: 12.7mm solid core board.
Structural Requirement: Utilize a floor-standing all-steel cabinet structure.
Surface: Black, 20mm thick ceramic surface, resistant to high temperatures, flame-resistant, low reflective, moisture-proof, effectively prevents the growth of bacteria, and its chemical corrosion resistance meets SEFA standards. The monolithic core of the countertop is made of the same material, it does not peel, swell, crack, and can be repaired after surface scratches. Durable and robust. Test reports required.
Case: The case is formed by bending a single sheet of steel on the sides and back, enhancing the load-bearing capacity. The case is made of epoxy resin coated galvanized steel, which is resistant to chemicals, moisture, high temperatures, and abrasion. The base material of the case is domestic 1.2±0.07mm cold-rolled steel plate, with both inner and outer surfaces electro galvanized at 20g/m² (~2.8μm), and both surfaces are statically coated and phosphated. The thickness of the epoxy resin coating is ≥50μm. The case is designed with a vertical, removable structure, allowing for individual or combined use of the cases.
Cabinet Door/Drawer Panel: Light grey. Double-layer design with sound-insulating material in between, both layers coated with epoxy resin. The inside of the cabinet door features anti-collision strips and nylon embedded door magnets. The drawers are equipped with removable dividers on both sides for easy use and organization.
Hinge: High-gloss 304 stainless steel, fixed without welding.
Handle: Stainless steel or zinc alloy.
 Shelf panels: Epoxy coated galvanized steel, matching cabinet color. All experimental cabinets with doors are equipped with adjustable shelf panels, which can be freely adjusted in 20mm increments. The panels are supported by four steel shelf clips, with a load-bearing capacity of over 40Kg.
Drawer assembly: Drawer tracks are made of cold-rolled steel sheet, stamped into shape. Heavy-duty enclosed slider with nylon ball bearings, and an automatic closure structure design. Anti-collision pads are installed on the interior surface of the drawer.
Base cabinet back panel: Installable removable access panel at the back of the cabinet door type cabinet for ease of installation and maintenance of public utilities.
The central section of the central console serves as a utility equipment mezzanine, designed to conceal water, electrical, and gas pipelines from ground预留 or ceiling-mounted service columns to the laboratory benchtops.
The machine frame has a load-bearing capacity of not less than 350 kg/m².
Reagent Rack: Zinc-coated steel with epoxy resin coating, steel thickness ≥ 1.0mm, double-layer construction. Utility pipelines for water, electricity, gas, etc., are concealed and laid.
2) Lab Bench / Instrument Bench
750/1000mm depth, 850mm height, standing setup, the experimental table features removable maintenance panels installed on the back for easy installation and inspection of gas pipelines and other accessories.
Vibration-resistant, static-dissipative, corrosion-resistant (including acid and alkali corrosion as well as organic solvent corrosion), strong load-bearing capacity; equipped with cable, power line, and gas pipeline storage devices; convenient and aesthetically pleasing installation for waste liquids, gases, and water pipelines.