Unidyne C6 Waterproofing Agent TG-4574
Waterproof and oil-resistant agent for textiles - Lotion type
1. Performance characteristics of C6 waterproofing agent
● Particularly suitable for processing on thin polyester fabrics like long fiber. ● Excellent waterproof properties.
● Provide a soft feel to the fabric
● Excellent stability when compounded with other fiber additives
● Eco-friendly Fabric Water and Oil Repellent (PFOA-Free: Detection Limit Below 5ppb)
2. Physical Properties
Appearance: Milky white to light yellow emulsion
Ionic, Weak Cationic
pH 3.0 ～ 5.0
Density (25°C) 1.1
Active Ingredient 24%
Solubility - Easily dispersible in cold water
Storage and Transportation - Non-hazardous Goods
Store in a cool, dark place (above -5°C and below 30°C). Avoid direct sunlight.
3. Waterproof and oil-resistant properties
Terms of Handling
Rolling Pressure: 3 kg/sq. m
Setting Conditions: 170℃ for 0.5 minute
Yarn Moisture Content: Long-staple Chiffon Red (42%), Chunya Spun Silk Lotus Green (46%), Memory-like Blue (53%), Long-staple Dacron Sky Blue (45%)
Nylon Crepe 20D - Black (46%) Nylon Crepe 20D - Blue (42%)
3.-1 Low Concentration Waterproof Performance
3.-2 Continuous Processing Performance
4. C6 Waterproof and Oil-Resistant Agent - Storage and Usage Precautions
1) Store in a cool, dark place (-5°C to 30°C). Avoid direct sunlight. 2) After use, tightly seal the container to prevent steam and foreign matter from entering. 3) Ensure good air circulation when in use.
4) Avoid contact with eyes, skin, and inhaling vapors during operation.
5. Emergency Response
1) In case of contact with eyes, rinse thoroughly with plenty of water for at least 15 minutes and seek ophthalmic examination. 2) If inhaled decomposition gases, seek medical attention immediately.
3) In case of accidental ingestion, please immediately vomit and undergo a check-up.
4) Upon contact with skin, wash thoroughly with water and soap.
6. Refer to the MSDS when in use.
