Product Application Scenarios:

Asbestosis Roofing Bubble SuppressorMade primarily from materials such as asbestos shingles, calcium silicate boards, cement slurry, joint compound, mineral slurry, cotton fibers, quicklime, and sand mortar, with the addition of pulp and glass fibers, etc. The product is manufactured through processes like pulping and sheet forming. Due to the presence of components like pulp, quicklime, and asbestos in the slurry that are prone to foaming, combined with rapid mixing, there is a significant amount of foam during production. The presence of these bubbles directly impacts the production process.

Product Overview:

Asbestos Roofing Bubble Defoamer by the Asbestos Roofing Bubble Defoamer manufacturer is a special defoamer designed for the working environment of asbestos roofing and calcium carbonate boards. It boasts defoaming, antifoaming, deaeration, and degassing properties, with features such as high-temperature resistance, acid and alkali resistance, low dosage, and non-corrosive nature. It has no adverse effects on the working fluid system and maintains system stability. Depending on the medium environment, it can be used directly or diluted with water, offering excellent antifoaming effects. It can also be added drop by drop when foam appears, providing a particularly rapid defoaming effect.

Product Features:

The asbestos roof tile defoaming agent has excellent dispersibility, which can disperse evenly in aqueous systems.

2. Anti-foaming and defoaming properties, with defoaming effectiveness 3-5 times that of ordinary defoaming agents.

3. High-temperature resistant and acid/alkali-resistant.

4. High cost-performance ratio

5. Non-corrosive to equipment, with no adverse effects on finished products; wastewater can be recycled.

6. Can dissolve well with other additives.