Professional Traffic Roadway Monitor Pole Installer, Customized Security Traffic Monitor Poles Available
Height typically ranges from 3 to 6 meters, primarily used for traffic roads, intersections, schools, residential communities, factories, border defense, airports, and other locations requiring surveillance cameras. The use of monitoring poles enhances urban safety prevention and effectively guarantees the residents' quality of life.
1The basic steel cage should be temporarily secured, while ensuring the base plate of the steel cage is level. This means measuring the base plate vertically in two directions with a level, observing that the bubble must be centered.
Centered; the concrete pouring for the pre-buried base of the monitoring pole must be dense, voids in the concrete are prohibited.
2When constructing, the pipe openings should be sealed with plastic or other materials in advance to prevent concrete from leaking into the pre-buried pipes during pouring, which may cause blockage in the pre-buried pipes; after the foundation pouring
The base surface must be higher than the ground level.5MM～10MMConcrete must be cured for a period of time to ensure it reaches the required installation strength.
3Each metal upright must be grounded, with its grounding resistance less than4Europe; specific data for each pole foundation is subject to on-site construction requirements.
Curb inlet construction
1Road surveillance pole generally only requires the use of small-sized manholes. For convenient installation of the equipment, it is recommended to set the manholes near the surveillance poles; when the groundwater level is not high, only gravel should be laid at the bottom of the manhole.
Stone (sand) bedding for the manhole to allow rainwater to seep into the ground, but concrete foundation bedding is required below the well wall, with the well wall coated in cement sand mortar; an additional layer at the bottom of the manhole when the groundwater level is very high.
10CMThe concrete base, well walls, and bottom should be coated with waterproof sand mortar.
2Net Dimensions500×500×600Please provide the Chinese content that needs to be translated into American English.×Wide×High (in specification), featuringMu10BrickM5Cement mortar240Thick masonry, cappedΦ8@150Bi-directional configurationC20Concrete precast panel thickness60Thick, standard
High-grade pedestrian walkways or green belts, the deck surface must be smooth, with lifting holes, and designed for the manufacture of lids. Specific construction data for manholes varies according to on-site construction requirements.
Shandong Tianwang Surveillance Equipment Co., Ltd. (SKNT) is located in Jinan City, Shandong Province. We are a professional manufacturer of surveillance equipment. Our main products include: surveillance poles, network cabinets, video walls, operator desks, multimedia podiums, and surveillance equipment.
