Equipment Usage:

This machine is used for slitting, trimming, rerolling, and defect inspection of foil.

Performance Features:

Circular knife cutting, each round knife is controlled by an independent servo, allowing adjustment of the blade angle.

Unwinding, winding, and the main unit all use servo motors and servo drives.

The entire machine is controlled by PLC and man-machine interface, featuring automatic tension and speed control. This achieves automated and programmed control, which is beneficial for ensuring quality and enhancing production efficiency, reducing the labor intensity for workers, and also lowering the requirement for their skill level.

To ensure the high efficiency and quality of our machines, and to provide our customers with peace of mind in both purchasing and using them, we recommend the following renowned brands for electrical appliances and components:

The unwinding and winding machine, as well as the main unit, are controlled by Yaskawa servo motors and Yaskawa dedicated servo drives. The German Siemens PLC is used, along with a 10-inch Taiwan Weilin human-machine interface. The push-button switches and relays are from the French Schneider brand, with NSK imported bearings and Taiwan Yadeke cylinders.

Aluminum guide wheels, steel wheels, rubber rollers, etc., provided by domestic well-known manufacturers.

Key Technical Parameters:

Copper foil thickness: 6um - 12um

2. Design Speed: 150 m/min

3. Open Book Diameter: 600mm

4. Raw Material Axle Size: Compatible with Foil Rolling Machine

5. Coiling Diameter: 600mm

6. Material Size: Material Width 1500mm

7. Finished Roll Width: 150mm - 1500mm

8. Core Tube Diameter: Suitable for cores with inner diameters of 77mm and 80mm

9. Slitting Width Precision: ±0.1mm (Accurate Knife Adjustment, Easy to Use)

10. Coiling Surface Precision: ±0.1mm (Coiling foil end face is neat, surface is flat, without dents, wrinkles, or copper powder defects, etc.)