TECCO Active Protection Mesh: Utilizing reinforcement bars (with pre-stress capability) and/or wire rope anchors, (with edge support ropes when applicable), special anchor pads, and edge support ropes as necessary, the flexible mesh, which serves as the main component of the system, is covered over slopes with potential geological hazards to achieve its protective purpose. Used for reinforcing and protecting soil or rock slopes prone to potential geological hazards such as collapses, landslides, shallow surface slips, and falling rocks. TECCO titanium mesh, also known as TECCO High-Strength Wire Rope Mesh, Titanium Mesh, SNS Flexible Slope Protection Mesh, SNS Wire Rope Protection Mesh, Slope Protection Mesh, and Rockfall Net, mainly includes active slope protection mesh, passive slope protection mesh, annular slope protection mesh, TECCO wire mesh fence, and the main components of slope protection mesh.
TECCO Titanium Net, also known as TECCO High-Tensile Steel Wire Rope Net, Titanium Net, SNS Flexible Slope Protection Mesh, SNS Steel Wire Protection Mesh, Slope Protection Mesh, Rockfall Mesh, etc., is mainly categorized into Active Slope Protection Mesh, Passive Slope Protection Mesh, Ring Slope Protection Mesh, TECCO Steel Wire Mesh, and the main components of Slope Protection Mesh.
The TECCO Grating Mesh Protection System is a type of SNS (Safety Netting System) active protection system. It covers flexible mesh over slopes with potential geological hazards by securing it with pre-stressed rebars (anchor rods) or wire rope anchor rods (when edge support ropes are used), special anchor pads, and edge support ropes as necessary. The pre-stressed anchor rods partially tension the flexible mesh, providing continuous support to the entire slope. This pre-tensioning operation ensures the system is as close as possible to the slope surface, creating a pre-stressed condition that inhibits local rock and soil movement or retains it in place in the event of local displacement or damage, thereby achieving its active protection (reinforcement) function.
TECCO Wire Mesh Specifications: Wire Diameter: 3.0mm; Mesh Size: 65mm x 65mm.
Wire Mesh: Made of 3.0 high-strength steel wire, with tensile strength exceeding 1770MP, mesh size is 65*65. Standard length and width are typically 10/20/30*3.5m (can be adjusted according to actual conditions).
Anchor Rods: Generally, use ?25/28 ordinary thread steel rebars with a machined thread on one end (exposed section) and as required, undergo hot-dipped galvanized anti-corrosion treatment.打入式锚杆：Select parts, using ?16 rebars, length typically 0.3-0.6m, with one end welded into a bend hook.