What are the requirements for the labels used on labelers?

Processing Requirements: The quality of label processing must ensure that the back paper is flat and free of any splits after cutting, to prevent the back paper from breaking due to tension changes. During die-cutting, avoid piercing the back paper or allowing adhesive to seep into the back paper, causing issues like missing labels or tearing the back paper. Additionally, eliminate static electricity within the label before applying it, as static can lead to missing labels or inaccurate application during the process. Back Paper Requirements: The back paper is also a critical factor in controlling automatic labeling machines. The surface of the back paper must be evenly coated with silicone and have consistent thickness for good tensile strength, so that the automatic labeling machine does not damage the labels. The back paper should also have good light transmission properties.

Electro-eye setup for an automatic labeling machine

How to use the photoelectric eye of the automatic labeling machine:

1) Thread the label through the U-shaped slot of the electric eye as shown in the figure below.

2) If the pull tab is engaged, the yellow signal light will illuminate in the spaces between the tabs and extinguish where the tabs are present. This indicates normal operation and the product can be used directly.

3) Reset the electric eye if the yellow signal light is either constantly on or off.

4) The method for setting the photo-eye is as follows:

Thread the label through the U-shaped slot of the electric eye as shown in the illustration.

b. Place the tagged area into the electric eye slot, then hold the adjust button for about 3 seconds until the electric eye's yellow indicator light blinks. Release the button, and then place the untagged area (only the label backing paper) into the slot, holding the adjust button for 8 seconds. Release the button, and at this point, the labeling machine manufacturer's settings are complete.

c. Pull the label through the electric eye slot on the labeling machine. You will notice the yellow signal light turns off at the spot where the label is applied, and it illuminates at the intervals between labels.

Labeling machines are crucial post-treatment packaging equipment for water treatment, widely used across various industries. A labeling machine consists of two main parts: the labeling machine itself and the label stripping machine, each playing a vital role. Below, Dongguan Yiyang Automation Labeling Machine manufacturer provides a general explanation of the components of a labeling machine. During equipment design, many details need to be considered, such as the positioning of the labeling machine, which should generally be placed in the left front part to reduce operational noise. Especially for the blade disc of the labeling machine, blade replacement is necessary in a timely manner. Currently, labeling machines are evolving towards greater convenience and stability. Label Stripping Machine Section The label stripping machine is a component of the labeling machine's post-treatment stage. It can be divided into steam and electrically heated machines, with the choice depending on factors like the material of the product labels. In summary, the practicality of labeling machines is increasingly evident. Their versatility across various industries and the importance of safe and convenient labeling machine manufacturers cannot be overstated.





Automatic Labeling Machine - Labeling Machine - Provided by Wangtaqi Intelligent Technology (Suzhou) Co., Ltd. in Suzhou Industrial Park. Wangtaqi Intelligent Technology (Suzhou) Co., Ltd. has been a witness to warehousing and distribution in Jiangsu, Suzhou. For many years, the company has implemented scientific management, innovative development, and honest trustworthiness to meet customer needs. The leadership of Wangtaqi Intelligent Technology warmly invites people from all walks of life to inquire and negotiate, creating a brighter future together.