How to install door sign luminous letters
Metal Glow Letters - Guangzhou Menghao Advertising Co., Ltd. was established in 2012. Menghao is a large-scale comprehensive advertising company integrating design (planning), production, installation, maintenance, and release.
Installation steps for luminous letters are as follows:
Firstly, layout according to the customer-provided drawings. Pay attention to the appropriateness of character size and the signboard's load-bearing capacity, etc. After determining the position, mark it with a construction pen. Before making any holes, inspect and clean the doorhead illuminated characters, checking for integrity and stability. If any loose or falling-off signs are found, address them promptly. Remove the reflective film inside the light box and keep it clean and tidy; also, clean the spray codes thoroughly for future use.
3. Next comes the drilling. Place the finished luminous body into the pre-set alignment line (adjust if not correct to the standard distance). Test for any light leaks from the back with a flashlight (some light leakage is normal). This is because the circular edges cut by the stainless steel laser cutter are elliptical surfaces, causing slight light transmission, commonly known as a "white screen." At this point, you can inspect the effect; if unsatisfied, adjust slightly with a flashlight. Then, first remove all the PVC protective paper, wait for it to dry before continuing: remove the light-blocking cardstock and reapply it to ensure no gaps at the seams to maintain aesthetics! After that, you can install the suction base: hold the side panel with a screwdriver, hang the hook on the track's opposite side, secure it, then remove and hang it at the other end. Use the same method to install the sign main component and connect the upper and lower corners to stand upright and securely. The next step is to install the decorative strip on the acrylic manhole cover, making the finished product more beautiful and enhancing the visual experience!
Punched Hole LED Letter Installation Cost
Metal Glow Letters - Guangzhou Menghao Advertising Co., Ltd. was established in 2012. Menghao is a large comprehensive advertising company that integrates design (planning), production, installation, maintenance, and release.
Installation costs for perforated luminous letters vary by region, material, and process factors. Generally, the price of these letters mainly depends on the quality of the materials used and the complexity of the production process, among other elements.
Firstly, looking at the cheaper materials, Guangzhou metal-illuminated letters, such as acrylic plates or PVC cardstock, the cost of these metal-illuminated letters varies, often consisting of a single layer and being relatively lightweight. Consequently, their installation methods on beams and walls differ from those of heavier, painted steel sheet letters, which are generally assembled from multiple steel plates. For individual letters up to 1.5 meters tall, the installation might cost just a few hundred yuan. However, for letters over 2 meters tall, metal-illuminated letter manufacturers must consider additional safety factors and technical challenges. Therefore, the specific installation cost needs to be assessed based on the actual situation.
Metal Glow Letters - Guangzhou Menghao Advertising Co., Ltd. was established in 2012. Menghao is a large-scale comprehensive advertising company that integrates design (planning), production, installation, maintenance, and release.
Installation steps for the advertising LED letters:
Firstly, apply a static-free spray to the storefront to prevent sparks from hitting unsuitable objects. Then, simply use a screwdriver to secure the guide strip to either the left or right side of the door.
2. Attach the suction cup hook to a suitable height on the outside of the door (preferably the kind with adhesive), then pull it firmly until it feels secure and release. Next, proceed with the assembly of the lettering, first combining the horizontal banner and the couplets in order and setting them aside. Then, align the holes on the base plate with the expansion bolts at the top and screw them in, promptly inserting the expansion plug into the inside of the door. Drilling holes on the corresponding positioning posts on the back panel and the frame with an electric drill, inserting foam blocks, and sealing them with silicone can also provide waterproofing.
Metal Glow Sign Manufacturer - Menghao Advertising (Online Inquiry) - Guangzhou Metal Glow Signs supplied by Guangzhou Menghao Advertising Co., Ltd. Adhering to the corporate philosophy of "People-Oriented," Guangzhou Menghao Advertising Co., Ltd. boasts a high-quality team of employees, striving to provide superior products and services to society. We warmly welcome both new and old customers to visit and patronize us, seeking sincere cooperation and a beautiful future together. Menghao Advertising - Your Trusted Friend, Company Address: No. 38 Heyuan Road, Tianhe District, Guangzhou (Menghao Advertising), Contact Person: Manager Zhang.
