Ultrasonic Thickness Gauge
HG-U800 Series High-Precision Ultrasonic Thickness Gauge
Penetration Coating Thickness Measurement
The powerful penetration coating thickness measurement function frees you from the tedious preparation of meticulous sanding, as a slight surface treatment of the coating is enough for easy thickness measurement.
Probe Zero Self-Calibration
Our probe zero-point calibration technology tracks the latest global technological trends. The calibration technology integrated with temperature measurement eliminates the hassle of a thickness gauge that cannot measure other materials, and it also solves the measurement error caused by probe zero-point drift. Quote for a color-screen high-precision coating ultrasonic thickness gauge, ensuring accurate measurement values and avoiding frequent equipment replacement.
New A-Scan/B-Scan snapshot feature, with synchronized digital display
The HG-U800 series offers A-scan/B-scan waveform display functionality, allowing users to directly view the ultrasonic signal waveform on the screen for easy verification of measurement data and issue analysis. The measured thickness value is simultaneously displayed below the waveform, providing a clear and intuitive visual representation.
Ultrasonic Thickness Gauge
Civil Defense Testing Equipment - Ultrasonic Thickness Gauge
Usage Instructions
1) Insert the probe plug into the host probe socket, press the "ON" button to power on, portable high-precision coating ultrasonic thickness gauge quote, full-screen display shows the last used sound velocity a few seconds later, high-precision coating ultrasonic thickness gauge quote, start measurement.
2) Adjust the sound velocity to the range suitable for the item to be tested (sound velocity of 5900 m/s is applicable for steel plates), then press the "Calibrate" button to enter calibration mode. Apply coupling agent to the instrument's included test block, couple the probe with the test block, and the four horizontal lines on the screen will gradually disappear until the screen displays 3.00mm (sound velocity selected: 5900 m/s), indicating the calibration is complete.
3) Apply the coupling agent to the test area, couple the probe with the material being tested, and the screen will display the thickness of the material.
Ultrasonic Thickness Gauge
Factors Influencing
The tested item's backside has numerous corrosion pits. Due to rust spots and corrosion凹坑 on the other side of the tested item, it causes sound wave attenuation, affecting the high-precision coating thickness gauge for ultra-thin materials. This leads to irregular readings, and in some cases, no readings at all.
The tested object (such as a pipeline) contains deposits. When the acoustic impedance difference between the deposits and the workpiece is not significant, the thickness gauge displays the combined wall thickness and deposit thickness.
When internal defects (such as inclusions, laminations, etc.) are present in the material, the displayed value is approximately 70% of the nominal thickness. At this point, an ultrasonic flaw detector can be used for further defect detection.
High-Precision Coating Ultrasonic Thickness Gauge Pricing - Provided by Beijing Hangu Precision Instrument Co., Ltd. Beijing Hangu Precision Instrument Co., Ltd. is located at Building 107, No. 2, Yard 2, Longxiang Plate-making Industrial Park, Changping District, Beijing. Striving and developing amidst the surge of market economy, Beijing Hangu has earned a good reputation in instruments, components, and equipment. Beijing Hangu's achievement of full network coverage signifies that our service and management levels have reached a new height. All employees of Beijing Hangu are willing to work with people of insight from all walks of life to achieve common development and create a better future.
