Firewalls can not only serve as partition walls within buildings but also as exterior walls.

Firewalls should be installed between adjacent horizontal fire divisions within the building, while fire partitions should be located between adjacent areas on the same floor of the building.

The firewall should be installed on the foundation or framework, beams, and other load-bearing structures. Fire-resistant partitions can be set on the non-combustible subgrade of the floor or floor slab. The firewall is "up and down," whereas the fire-resistant partition is not; it varies with the changes in the interior layout of the building. As long as the fire resistance time meets the specifications, it does not need to be "up and down," but only needs to be "up to the heavens and down to the earth."

The firewall should be a non-combustible wall with a fire resistance limit of ≥3.0 hours. For firewalls in Class A and B workshops, as well as in Class A, B, and C warehouses, the fire resistance limit should not be less than 4.00 hours. The fire partition wall should also be non-combustible, but its fire resistance limit only needs to meet the specified requirements.

Several Key Points to Consider When Purchasing Fireproof Partition Panels

1. Base panel and membrane coating thickness of fire-resistant partition boards

When purchasing fire-resistant partition boards, the thickness of the base panel and the coating on the fluorocarbon paint fire-resistant board manufacturers is crucial. The film or coating thickness is about 0.15mm. However, some manufacturers reduce thickness to cut costs, which greatly shortens the lifespan of the fire-resistant partition board. Therefore, it's essential to verify this when purchasing.

2. Fire-resistant partition board edges

When purchasing fire-resistant partition boards, after selecting Taizhou fluorocarbon lacquer fireboards, the second aspect to consider is whether the edges of the partition boards are tightly sealed and smooth, or if there are any other impurities like grayish or dark spots. High-quality partition boards have tightly sealed, smooth, and shiny edges.

3. The sound after knocking on the fire-resistant partition panel

When purchasing fire-resistant partition boards, the third step is to listen. Gently tap the fire-resistant partition board with your fingers or another object. If the sound is dull, the quality is较差. If the sound is crisp, loud, and accompanied by a metallic sound, the quality is better.

When protecting fire-rated partition boards, note the following points:

One, for the tie-down tools to be used, secure them properly; do not just grab any rope to tie them, as this may damage its surface.

If the length of the fire-resistant partition board exceeds six meters, it should be segmented and tied separately. For instance, a carbon fluorocarbon paint fire-resistant board manufacturer might set the length at three meters per segment.

When using ropes for binding, a pad slightly wider than the board should be used for support.

Four, when installing fire-resistant partitions, do not exceed twelve metal plates per pallet.

During installation, first mark the location of the lead holes with a pen to ensure that self-tapping screws and rivets do not misalign or damage the panel surface. This ensures the panel's aesthetic appearance and reduces weak points in the structure caused by missed drilling.

Fluorocarbon Paint Fire Retardant Board Manufacturer - Xingmei Security - Taizhou Fluorocarbon Paint Fire Retardant Board provided by Shanghai Xingmei Security Engineering Co., Ltd. Located at 655 Fengzhou Road, Jiaoding District, Shanghai, Room 201, Building 14, Shanghai Xingmei Security Engineering Co., Ltd. has fought and developed amidst the waves of market economy, and currently enjoys a good reputation in fire-resistant and fireproof materials. Shanghai Xingmei Security Engineering has achieved the entire network, signifying that our service and management levels have reached a new height. All employees of Shanghai Xingmei Security Engineering are willing to develop together with people of insight from all walks of life, to create a better future.