Explosion relief walls differ from traditional stone笼nets, as they can not only accommodate stones but also finer materials like sand. The filling material can be sourced locally, making them particularly suitable for use in river basins or coastal areas where stone is scarce. For dangerous factories and warehouses, a centralized and zoned layout should be adopted.

The material area density of the pressure relief wall should not be too high.

1. The material area density of pressure relief walls should not be too high. If the selected material is difficult to burn, the fire resistance level should not be overly high. When the material used is non-combustible, the fire resistance level should not be too low.

2. Lightweight wall panels without thermal insulation requirements, such as Jiaxing explosion-proof walls, should be made of fiber cement medium corrugated sheets, flame-retardant glass fiber reinforced polyester corrugated sheets, or pressed plates, etc.

3. For lightweight walls with thermal insulation requirements, materials such as non-combustible perlite boards, rock wool boards, ultra-fine glass wool boards, etc., should be selected for the design specifications.

(1) Explosion-proof walls should be designed with non-combustible fire-resistant materials; explosion-proof walls should not be selected as load-bearing walls for buildings.

(2) Explosion-proof/blast-proof walls should be constructed with reinforced brick walls. If there are important items in the adjacent room, reinforced concrete walls must be used.

(3) Reinforced brick wall thickness is determined based on the entire house structure, accurately calculating the brick strength and mortar strength.

(4) The thickness of the concrete explosion-proof wall should not be less than 180mm, and the concrete strength grade should not be less than C20.

(5) Do not drill holes or leave gaps in the explosion-proof wall. If pipes for water or electricity need to pass through, ensure the holes are not too large and properly seal the openings afterward.

Explosion relief wall systems feature an empty cavity filled with insulating material in the middle. As an explosion relief wall manufacturer, we can meet the insulation requirements of standard projects. For higher insulation needs, the wall thickness can be adjusted through calculation, or traditional internal and external wall insulation methods can be employed.

The explosion relief and pressure relief system, as a mature exterior wall system and explosion relief wall supplier, ensures no leaks in the exterior wall by using staggered panel arrangement and joint sealant treatment, followed by the application of exterior wall paint on the surface.

Materials for explosion and pressure relief roofs are all pre-formed at the factory, requiring only welding and bolt fastening on-site. The low-density panels are easy to drill holes and route cables through, making the system installation simple and quick.

The explosion relief wall surface is extremely smooth, eliminating the need for a leveling layer during the exterior wall coating process, and can proceed directly to the exterior wall coating stage.

Explosion Relief Wall Price per Square - Jiaxing Explosion Relief Wall - Shanghai Xingmei (View). Provided by Shanghai Xingmei Security Engineering Co., Ltd. "Anti-violence Wall Panels, Explosion-proof Walls, Warehouse Fireproof Walls" - choose Shanghai Xingmei Security Engineering Co., Ltd. The company is located at: Room 201, Building 14, No. 655 Fengzhou Road, Jiading District, Shanghai. For many years, Shanghai Xingmei Security Engineering has been committed to providing quality service to our customers. Contact: General Manager Sun. Welcome to call, email, or visit us for business discussions. Shanghai Xingmei Security Engineering looks forward to becoming your long-term partner!