PB300Key features of the flat-top overhead discharge enclosed centrifuge:

   1The structure is well-designed, effectively removing卫生blind spots, with smooth transitions in components. The surface is polished, and all external components, fasteners, and drums are made of stainless steel. The housing features a flip-top design, allowing for cleaning the space between the centrifuge housing and drum.

   2The base and housing are a monolithic welded structure, offering high load-bearing strength.

   3The machine base features a flat plate structure, which reduces the machine's center of gravity, allowing for a smaller installation space. The flat base can also serve as an operating platform, making operation more convenient.

   4Equipped with liquid damping shock absorbers for more effective vibration reduction and simplified daily maintenance.

   5Housing flip lid, equipped with feed tube, washing tube, sight glass opening, and lighting hole. Configured with an online cleaning system (spray system), which cleans the interior wall of the centrifuge housing, the inner and outer surfaces of the drum, and the surface of the collecting trough, etc., ensuring cleanliness requirements and compliance.GMP Standardized.

   6Simple structure, easy to operate and maintain.

   7Highly versatile and widely applicable. Suitable for separating suspensions with solid particles as well as fibrous materials.

   8The equipment can be started with a variable-frequency inverter, ensuring smooth startup and adjustable separation factor; features a non-contact energy-saving braking system; static electricity-proof belt transmission; and an enclosed structure with sealing parts made of silicone rubber or fluororubber. It can meet the requirements for explosion-proof encapsulation, making it suitable for use in toxic, flammable, and explosive environments.

   9Equipped with a nitrogen protection system to ensure isolation of the centrifuge's internal cavity from external air.

   10Grain is not prone to breakage.

   11、 PBZ Centrifuges are equipped with direct-drive explosion-proof motors, eliminating friction dust that might be caused by belt transmission; additionally, due to the motor being installed at the bottom of the machine, the centrifuge occupies less floor space. The above configurations are available in both chemical and pharmaceutical versions, allowing for selection according to specific requirements to meet technical and economic criteria.

  The above configurations are available in both chemical and pharmaceutical versions, and can be selected according to specific requirements to meet technical and economic criteria.

Standard Configuration:

   Structure: Shell equipped with flip cover, feed tube, washing tube, sight glass hole, exhaust port, and lighting hole; sealed structure, drum and shell, flip cover, and other components are made of stainless steel.(SUS304) Manufacturing.

   All fasteners are made of stainless steel.

   Transmission and Braking: Standard motor (or explosion-proof motor) + Friction-type automatic clutch + Friction-type manual braking device.PBZ Utilizes direct-connected explosion-proof motor and variable-frequency controller.

   Electrical Control Unit (Control Box)

   Damping vibration absorber.

Optional Configurations:

   ◎Online Cleaning System.

   Nitrogen protection system.

   ◎ Select appropriate stainless steel materials based on the corrosion resistance requirements of the separated materials by the user.SUS304 、 316 、 316L 、 321 Tungsten or titanium materials (etc.)TASurface rubber lining on the part in contact with materials.PE Interlininghalar 。

   Vibration protection device.

   ◎Lid protection device.

   现场 Explosion-Proof Push Button

   Transmission and Braking: Explosion-proof motor (or standard motor) + Variable frequency inverter + Energy-saving brake