Introduction: The RY high-temperature heat-conducting oil centrifugal pump boasts advanced technology and high efficiency, capable of long-term stable operation without leakage under high-temperature conditions. It features no additional cooling system and is safe and reliable for use. It has been widely utilized in China's heat-conducting medium heating systems and has entered various industrial fields such as petrochemical, rubber, plastic, textile, dyeing and printing, road construction, and food processing.

I. Advantages of RY Thermal Oil Pumps:

The RY thermal oil pump boasts advanced technology and high efficiency, ensuring long-term stable operation without leakage under high temperatures, without additional cooling systems, and is safe and reliable. It is widely used in China's heat-conducting medium heating systems and has entered various industrial fields such as petrochemicals, rubber, plastics, textiles, dyeing and printing, road construction, and food processing. The RY series air-cooled thermal oil pump is mainly used for transporting non-solid particle-containing, weakly corrosive high-temperature liquids with a service temperature of ≤370°C, making it an ideal circulating pump. It is extensively applied in industries such as high-temperature shaping of paper food containers, dynamic vulcanization of tires and regenerative rubber machinery, flat vulcanization, rubber drying, feed drying, dyeing and printing, chemical industry, plywood production, waterproof membrane production, asphalt heating, and noodles drying.

II. Structural Features:

The RY thermal oil pump is a product developed based on the digestion and absorption of foreign oil pumps. Its basic structural form is a single-stage, single-suction, cantilevered foot-supported structure. The pump's inlet is axially吸入, and the outlet is vertically upward in the center, mounted on the base with the motor.

(2) The RY-type thermal oil pump employs a double-end ball bearing support structure, with the front end lubricated by oil and the rear end by grease. There is a guiding oil pipe in the middle for real-time observation of the sealing condition and recovery of the thermal oil.

(3) Utilizes an auto-heat dissipation structure, altering the traditional water cooling design. This results in a simpler structure, smaller size, reduced operating costs, superior performance, and reliable usage.

(4) A combination of packed and mechanical seals is used, with the packed seal employing high-temperature-resistant packing material for excellent thermal adaptability. The mechanical seal is made of hard alloy material with high mechanical strength and good wear resistance, ensuring sealing performance under high-temperature conditions.

(5) Utilizing third-generation polytetrafluoroethylene (PTFE, commonly abbreviated) for唇seal design, it has achieved a significant leap in sealing performance, offering 25 times greater reliability than rubber seals and excellent corrosion resistance.

RY Thermal Oil Pump (Thermal Oil Pump|Hot Oil Pump) features reasonable structure, excellent performance, and reliable operation. It is suitable for transporting high-temperature liquids without solid particles. Its corrosion resistance and operating temperature depend on the material of the main parts in contact with the medium (categorized into three types: 1. HT200; II. ZG230-450; III. 1Cr18Ni9Ti, OCr18Ni12-Mo2Ti).

1. Petroleum and Chemical Industry

2. Oil Industry

3. Synthetic Fiber Industry

4. Textile Printing and Dyeing Industry

5. Plastics and Rubber Industry

6. Paper Industry

7. Wood Industry

8. Construction Industry

Additionally, it is widely used in the machinery industry, food industry, and oil circulation systems for hot oil furnaces and heating circulation systems.

Flow Rate: 1-500 m³/h

2. Flow Range: 10-125m

3. Temperature: -20°C - 350°C