After spraying, the equipment should be cleaned promptly; otherwise, the paint will solidify and block the channels, making it very difficult to clean. 8) When the equipment is shipped, there is a small amount of engine oil in the system. The price of the pipe coating oil machine, whether the pipe coating oil machine is good for the first use, please clean it with a solvent before using. If the equipment is not used for a long time, a small amount of light engine oil is allowed in the system to prevent internal rust. 9) The nozzle is equipped with a filter at the back, available in several specifications including 60 mesh, 100 mesh, and 200 mesh, with the installed one being 60 mesh. Users can choose according to the different viscosity of the paint. 10) A 15-meter long high-pressure flexible hose is included, and if it's not long enough, users can place an additional order.
Painted Steel Pipe Equipment Introduction
Spray painting pipe equipment is a device used for surface coating treatment on steel pipes. The equipment usually consists of sprayers, nozzles, spray heads, conveyors, and control systems. Its working principle involves spraying paint onto the surface of steel pipes, then transporting the coated pipes through conveyors to an oven for drying, followed by quality inspection and packaging. The spray painting pipe equipment can significantly enhance coating efficiency and quality, and is widely used in construction, chemicals, machinery, and electricity sectors.
Latex paint is a high-viscosity water-based coating. During application, manufacturers typically impose very strict limitations on the addition of water to the original paint, with the exception of special formulations that allow for slightly more water without affecting the paint's properties, which are noted on the product manual. Over-dilution can lead to poor film formation, and the texture, scrub resistance, and durability will be damaged to varying degrees. The extent of the damage is proportional to the dilution level, meaning the higher the dilution, the poorer the paint film quality. If strictly adhering to the manufacturer's dilution requirements, the latex paint will have a high viscosity, making application difficult. When using roller, brush, or air spray application methods, the finish is often unsatisfactory. However, in international practices, high-pressure, airless spray guns are used for application.
Heilongjiang Pipe Coating Machine - Pipe Coating Machine Price - Hang Xing Da (Recommended Supplier) provided by Suzhou Hang Xing Da Machinery Co., Ltd. Suzhou Hang Xing Da Machinery Co., Ltd. is a witness to the development of spraying equipment in Suzhou, Jiangsu. For many years, the company has implemented the policy of scientific management, innovative development, and honesty, meeting customer needs. With the leadership of Hang Xing Da and the enthusiasm of all staff, we warmly welcome people from all walks of life to inquire and negotiate, jointly creating a brighter future for Hang Xing Da.





























