ZN-C Type New Concentration Drum

ZN-C Type New Concentration Vessel
1. The ZN-C type is an extended cylinder section separator.
2. To overcome the drawback of the secondary steam from the concentrator's top condensing and returning to the tank before entering the condenser, this equipment modifies the condenser to a slanting horizontal design.
3. To enhance the production capacity of the equipment, the heating surface area of the concentrator jacket, as well as the condenser and cooler, have been increased to varying degrees.
4. To prevent dead corners in the outlet pipe of the concentrate tank, this product uses a stainless steel spherical shape.
5. A quick-release handhole is set at the bottom of the concentrator for easy cleaning of residual liquid and sludge inside.
6. The ZN-C model features a heating jacket divided into two or three sections. When the liquid level is low, it automatically closes the upper section to prevent dry wall. The bottom has been changed to a conical shape for easier drainage of the concentrated liquid.
| Project | ZN-C-200 | ZN-C-300 | ZN-C-500 | ZN-C-700 | ZN-C-1000 |
| Evaporating Pot Melt | 250 | 400 | 670 | 800 | 1220 |
| Liquid Cylinder Volume L | 150 | 240 | 350 | 500 | 760 |
| Evaporation Volume kg/n | 70 | 90 | 115 | 140 | 180 |
| Steam Pressure: MPa | <0.3 | <0.3 | <0.3 | <0.3 | <0.3 |
| Vacuum Degree kg | <60 | <60 | <60 | <60 | <60 |
| Heating Area: m²2 | 1 | 1.4 | 2 | 2.3 | 3 |
| Condensation Area m2 | 2.5 | 4 | 5 | 7 | 8 |
| Equipment Weight: kg | 630 | 950 | 1350 | 1700 | 2200 |
| Equipment Height mm | 2600 | 2650 | 3100 | 3270 | 3550 |
| Equipment footprint: mm | 1900×620 | 2140×850 | 2300×950 | 2500×1000 | 2750×1150 |



























