ProductDisplay

Carbon steel storage tanks are used for containing non-corrosive powdered materials, industrial concentrated sulfuric acid, caustic soda, neutral water solutions, oil substances, etc., and are now widely used in various industries such as sanitation, chemicals, and food.

Tank Types: Vertical, Horizontal, Flat-end, Elliptical-end, Round, Square, Conical, Flat-bottomed, Round-bottomed, Sloped-bottom, Conical-bottom, etc.

Regarding carbon steel storage tanks for storing concentrated sulfuric acid:

At certain temperatures, the corrosion rate of carbon steel by dilute sulfuric acid increases with the concentration, and after reaching a certain concentration, the corrosion rate decreases sharply with further increases in concentration. For concentrated sulfuric acid with a concentration above 80% and a temperature below 60°C, carbon steel and cast iron exhibit good corrosion resistance, but it is not suitable for flowing sulfuric acid. Flow rates exceeding 0.67 m/s can cause turbulent corrosion, particularly at the inlets and outlets of pipelines.

2. Sulfuric acid with a concentration greater than 70% can cause passivation when it meets iron, oxidizing the steel surface to form an oxide layer. Due to the minimal water content and lack of free ions in concentrated sulfuric acid, the oxide layer will not be further oxidized or corroded. Therefore, using carbon steel tanks is entirely acceptable, but a certain corrosion allowance must be left.

3. Due to the hygroscopic nature of concentrated sulfuric acid, it is crucial to prevent moisture when storing in carbon steel tanks. You can add desiccants to the tank's breathing line, and for large carbon steel tanks, nitrogen blanketing can be used to isolate moisture and vapor.