Product Category: Flange Nuts

Product Origin: Wenzhou

Business Model: Manufacturing and Processing

Main Products: Spring Clips, Retaining Rings; Bolts; Washers; Nuts

Principle: Adhere to honesty, trust, mutual benefits, and joint development.

Purpose: Continuous Innovation, Perfection in Excellence

Application: Automotive Industry, Mechanical Manufacturing, Pneumatic Tools, Furniture Hardware, etc.

The three-point locking nut for flange face is a component used to tightly connect mechanical equipment. It can only be connected with bolts of the same specification, such as the M4-P0.7 flange face locking nut can only be paired with bolts from the M4-P0.7 series (in the flange face locking nut, M4 indicates the inner diameter of the nut is approximately 4mm, and 0.7 refers to the distance between two threads as 0.7mm). American-made products follow the same principle, for example, a 1/4-20 flange face locking nut can only be used with a 1/4-20 stud (1/4 indicates the inner diameter of the nut is approximately 0.25 inches, and 20 refers to 20 threads per inch).

The DISC-LOCK anti-loosening face flange three-point locknut is composed of two parts, each with interlocked cams. Due to the internal wedge design, the slope angle is greater than the face flange three-point locknut angle of the bolt, allowing the combination to tightly interlock into a single unit. During vibration, the protruding parts of the DISC-LOCK anti-loosening face flange three-point locknut move against each other, generating lifting tension to achieve flawless anti-loosening performance.