I. The main application of the side-mounted medium-speed grinder

The side-mounted medium-speed granulator is designed for use next to injection molding machines to crush plastic scraps, waste, gate-off material, and semi-finished products generated during the injection molding process. The crushed particles are then processed through a recycling system, mixed with raw materials in proportion, and reused. Placing the side-mounted medium-speed granulator next to the injection molding machine for crushing gate-off material and recycling significantly reduces production costs. It also promotes environmental protection by recycling gate-off material and offcuts. With the addition of a recycling unit operated by a robotic arm, manual operation is unnecessary, thereby saving on labor costs.

II. Features

1. Taizhou Large Plastic Granulator, the medium-speed side granulator is primarily used next to plastic molding machines in conjunction with robotic arms to crush sprue material into granular form.

2. The design of the knife holder and the knife configuration ensure uniform particle size of the crushed material and minimal dust. The stepped dynamic knife design boasts exceptional crushing power.

3. The product has undergone at least an optimization of its external dimensions, saving space, and is equipped with wheels at the bottom for easy movement.

4. Versatile Usage: This model is suitable for granulating and recycling water sprue materials of soft and hard materials such as PU, PET, PC, ABS, etc.

5. Immediate recycling within 30 seconds; no need for centralized crushing, and ensure cleanliness and dryness.

6, Equipped with overload protection for the motor, power interlock, and safety switches, etc., how much is a large plastic shredder? It also features a machine jam alarm system for easy and safe operation.

7. Due to the low rotational speed of this model, large plastic shredder prices are available, and it is equipped with noise insulation, thus producing minimal noise during operation.

8. The machine boasts an aesthetically pleasing appearance, harmonious color coordination, and durable paint finish. It features a separation design with an inlet hopper, crushing chamber, and funnel cyclone separator.

9. Buffered room feeding with imported suspended curtain design to prevent material splashing.

10. Water gate material is immediately crushed, allowing for direct mixing with new material to avoid color discrepancies.

11. The belt pulley is equipped with a protective cover, and the feeding fan is equipped with an overload protection device.

Cautionary Notes:

The machine's standard voltage specifications are: 3Φ. 380V, 50Hz.

The large crushing capacity depends on the mesh size and material.

Please contact our company to confirm if you require special specifications customization.

*Product specifications may change without prior notice.

9. Do not shut down the machine immediately after work; let it run for 2-3 minutes to ensure all materials inside are fully discharged. After shutdown, cleaning and maintenance should be conducted. 10. The hammer blade is a major wear part. Whether replacing the edges in the same direction or flipping and replacing the edges, the entire set of hammer blades should be replaced simultaneously. When replacing new hammer blades, the entire set should be replaced at once; individual blades should not be used to replace worn ones. The sieve plate is also a wear part. If some sieve plates are damaged, they can be riveted; for severe damage, new sieve plates are required.




Due to the high rotation speed and large air volume of the micro-pulverizer, it is suitable for the crushing of heat-sensitive materials such as synthetic resins, sulfur, food, Chinese herbs, phosphates, magnesium carbonate, and other items. Operation and Preparation (1) Before starting up: 1. Check the integrity and tightness of the parts, especially the high-speed rotating components like hammers, which must be securely fastened. 2. Verify that the pulverizer is securely mounted on the base. 3. Inspect the lubrication condition of the bearings. 4. Open the door cover of the crushing chamber to check for any debris.




Taizhou Large Plastic Shredder - Suzhou Jinyuelang Machinery Co., Ltd. - Large Plastic Shredder prices are provided by Suzhou Jinyuelang Machinery Equipment Co., Ltd. With solid capabilities and reliable reputation, Jinyuelang Machinery has accumulated a large number of loyal customers in the injection molding machine industry in Suzhou, Jiangsu. With a commitment to continuous improvement and innovative thinking, Jinyuelang Machinery joins hands with you to stride towards brilliance and create a beautiful future together!