Inside the machine, the粉碎rotor, composed of 56 blades from 4 groups of cutting disks, is supported on the bearing seats of the left and right end caps for high-speed rotation. This causes the solid material particles to be compressed, torn, and collided between the toothed lining and the blades in the cavity, achieving the crushing purpose through a variety of mechanisms such as shearing. At the same time, the high-speed rotation of the large and small impellers at both ends of the rotor creates a vortex effect between the inlet and outlet through the cavity, allowing the crushed particles to smoothly enter (with a larger gap) and exit (with a smaller gap), thus achieving both crushing and refinement. To prevent the cavity temperature from rising too high, improve the crushing efficiency, and prevent particle adhesion, blade adhesion, tooth clogging, and clumping, four groups of wide cavity water jackets on the cavity surface are used for forced water cooling, keeping the internal cavity temperature at a low level.




(12) When the output of the crusher suddenly drops, in addition to the factors of raw materials, it is important to check whether the make-up air door is in place, whether there are air leaks in the pipeline, whether the pulse bag filter is blocked, and whether the solenoid valve and fan are operating normally. The maintenance and upkeep of the machine installation is an important and regular task. Huai'an Plastic Crusher, it should be closely coordinated with operation and maintenance, and there should be a dedicated staff member on duty for inspections. I. Machine Maintenance: 1. The shaft bearing bears the full load of the machine, so good lubrication is crucial for the bearing's lifespan. How much is a plastic crusher? It directly affects the machine's service life and operating rate, thus, the lubricating oil injected must be clean, and the seal must be good. The main oiling points of this machine are...




The deep-freeze crushing system forms a closed-loop cooling system during the material crushing process, maximizing energy utilization and saving energy consumption: the cooling source for crushing can be lowered to -196 degrees Celsius. Depending on the material's脆化point temperature, the temperature can be adjusted during the crushing process, allowing for the selection of crushing temperatures to reduce energy consumption: the fineness of the crushed material can reach 10-700 mesh, even down to micrometers (μ): liquid nitrogen is used as the grinding medium, achieving ultra-low temperature crushing, and providing comprehensive effects such as explosion-proofing and anti-oxidation for the material.




Plastic Crusher - How Much? - Provided by Suzhou JinYueLang Machinery Co., Ltd. Suzhou JinYueLang Machinery Co., Ltd. is located at the first floor, east side, of building No. 289, Jingmao Road, Suzhou Industrial Park. Striving and developing amidst the tide of market economy, JinYueLang Machinery has earned a good reputation in the injection molding machine sector. The company's achievement of an all-round network signifies a new height in our service and management standards. All employees of JinYueLang Machinery are willing to work together with like-minded individuals from all walks of life to pursue common development and create a brighter future.