




During the crushing process, the external forces applied to the solid include shearing, impact, rolling, and grinding. Shearing is mainly used in coarse crushing (粉碎) and crushing operations, suitable for materials with toughness or fiber content, as well as for the crushing or粉碎 of large pieces; impact is primarily used in crushing operations, suitable for brittle materials; rolling is mainly used in high fineness crushing (ultra-fine粉碎) operations, suitable for ultra-fine粉碎ing of most material properties; grinding is mainly used in ultra-fine粉碎ing or ultra-large-scale粉碎ing equipment, such as the Taizhou new silent plastic粉碎机, suitable for further粉碎ing after the crushing operation.
In case of this situation, the material door should be immediately reduced or closed, or the feeding method can be altered. What brand of new silent plastic shredder is good? Controlling the feeding amount by increasing the feeder. Feeders are available in manual and automatic types, and users should choose the appropriate one based on the actual situation. Due to the high speed and heavy load of the shredder, and the strong fluctuation of the load, the current during the shredder's operation is generally controlled at about 85% of the rated current. (2) If the discharge pipe is not flowing smoothly or is blocked due to too fast feeding, it will cause the shredder's air outlet to be blocked; improper matching with conveying equipment can lead to a weakened or blocked air flow in the discharge pipe after the wind stops.
(10) If the grinder shows excessive vibration and high noise, stop and inspect immediately; (11) After the main shaft bearing has run for 40 hours, add 80 grams of lubricant, but only up to 60%. After 1800 hours of operation, remove the bearing housing cover and replace all used lubricant. When applying fresh lubricant to the new silent plastic grinder equipment, add lubricant to the area around the roller and bearing ring, and add 1/3 to 1/2 of the lubricant to the bottom housing. Never overfill the lubricant.
What brand of new silent plastic granulator is good? Provided by Suzhou Jinyuelang Machinery Equipment Co., Ltd. Choose "Injection Molding Machine" from Suzhou Jinyuelang Machinery Equipment Co., Ltd., located at 289 Jingmao Road, South Building, 1st Floor, East Side, Suzhou Industrial Park. For many years, Jinyuelang Machinery has been committed to providing excellent service to customers. Contact: Ni Yue-neng. Welcome all new and old customers to call, write, visit, and discuss business. Jinyuelang Machinery looks forward to becoming your long-term partner!































