5. Inspect the tightness of the flow plate, small plastic granulator equipment, and remove debris magnetically adhered to the magnets. (2) Startup: 1. After completing the above checks, start the motor to run at no load. Once all parts are in normal technical condition and the speed is stable, proceed to load operation. 2. During operation, the Anqing small plastic granulator should not produce any magnetic locking or friction noises. 3. The sieve should be securely installed, sealed, and not leak material; the sieve frame must be tightly fastened. 4. If abnormal noises, material blockage, overheating of the bearings or motor are detected during operation, stop feeding, park the machine, and inspect to eliminate the fault.
(12) When the output of the crushing machine suddenly drops, in addition to the raw material factors, it is important to check whether the make-up air door is in place, whether there are air leaks in the pipeline, whether the pulse bag filter is blocked, and whether the solenoid valve and fan are operating normally. Maintenance and care of the machine is an important and regular task. For small plastic crushing machines, their operation and maintenance should be closely coordinated, and a dedicated staff member should be on duty for inspections. I. Machine Maintenance: 1. The shaft bearing carries the full load of the machine, so good lubrication is crucial for the bearing's lifespan, directly affecting the machine's service life and operating rate. Therefore, the lubricating oil injected must be clean, and the seal must be good. The main oiling points of this machine are...
With a combination structure frame made from precision-processed thick plates, a powerful rotating shaft for large-angle hexagonal columns, and a sturdy, large-diameter feed hopper, it can safely accommodate large raw materials. The rotating blades, designed and processed for thickness, shape, and arrangement, feature strong shearing power and sharp edges for effective crushing. Operating at low speeds, they produce minimal noise and dust. The blades are made from special alloy steel, ensuring durability, low speed, low noise, and high torque, making them suitable for crushing oversized and thickly fragmented materials.
Suzhou JinYueLang Machinery (Photo) - Small Plastic Crusher Model - The small plastic crusher in Anqing is supplied by Suzhou JinYueLang Machinery Equipment Co., Ltd. JinYueLang Machinery dedicates much enthusiasm and passion to the field of injection molding machines. We always focus on our customers, creating value for them, and win the market through quality and service. We sincerely hope to cooperate with all sectors of society to achieve success and brilliance together. For related business inquiries, please contact: Ni YueNeng.
