Aluminum channel installation method

Press the sides of the square board into the grooves of the triangular rib first, install both sides horizontally, locate the right angles, then draw a straight line, and gradually secure the panels in a row. Adjust after each fitting to ensure the board surface is flat and the seams are perpendicular. How much are the aluminum square tube panels?

Wear gloves when fastening the panel. If you accidentally leave any stains on the surface, please clean with clear water. Do not peel off the protective film during installation.

Our company currently specializes in the production and sale of products such as aluminum single panels, aluminum channel, aluminum ceiling tiles, aluminum square tubes, aluminum strip, aluminum hanging panels, aluminum gratings, Great Wall panels, woven aluminum panels, aluminum honeycomb panels, and various ceiling accessories. Surface treatments include electrostatic powder coating, pure polyester, acrylic, fluorocarbon, porcelain coating, wood grain, marble grain, and more.

Aluminum Ceiling Fitting Description

Installation accessories include: triangular steel, light steel stud, all-thread screws, light steel hangers, pull anchors, screws, and nuts. Triangular steel: Also known as the main stud, this accessory is used to clip the main aluminum clip panels. Light steel stud: Also called the secondary stud, it comes in 38mm and 50mm sizes. The secondary stud for aluminum square tube and aluminum clip ceiling is primarily the 38mm light steel stud, which is installed perpendicular to the triangular steel to form an integrated panel.

Aluminum Grating Ceiling Manufacturing Process, Operation Techniques

Using a level, mark horizontal points at each corner of every wall (or column) inside the room (if walls are long, mark several points in the middle as well). Draw a level line (usually 500mm above the ground), measure from the level line to the ceiling design height, and draw a level line along the wall (or column) with a chalk line, which will be the bottom line of the ceiling grid. At the same time, according to the ceiling plan, mark the positions of the main beams on the concrete ceiling. The main beams should be divided from the center of the ceiling to both sides, with a maximum spacing of 1000mm, following the principle of aluminum square tube panels, and mark the fixed points of the hangers, with a spacing of 900mm to 1000mm between the fixed points of the hangers. If the fixed points for beams and pipes exceed the design and specification requirements, increase the fixed points of the hangers. (2) Fixed hanging components

Aluminum Square Tubes - Prinsen Building Materials Co., Ltd. - Aluminum square tube installation is provided by Suzhou Prinsen Building Materials Co., Ltd. Prinsen Building Materials Co., Ltd. is a company specializing in "aluminum ceiling suspended ceilings, curtain walls." Since its establishment, we have adhered to the policy of "honesty as the foundation, stable operation," actively participating in the healthy market competition, and ensuring that the "Prinsen, Lvding, Yiersen" brand enjoys a good reputation. We uphold the principle of "customer service first, customer satisfaction first," which has helped Prinsen gain clients' trust in partitioning and suspended ceilings, and established a positive corporate image. Special Note: The images and materials provided in this information are for reference only. Please contact us for accurate information. Thank you!