The 886 series online density (concentration) sensor is a continuous online instrument for measuring liquid density, primarily used in industrial process automation control. It generates a corresponding 4-20mA analog signal based on the density of the medium and can also output digital signals for remote calibration and monitoring after conversion. Depending on the specific industrial process, density can be expressed as Brix, GL, Baume, Plato, or concentration percentage.
The 886 series online density (concentration) sensors are widely applicable in industrial fields such as on-site pipelines, open or sealed storage tanks, allowing for continuous and real-time online measurement of liquid density in pipes or tanks.
Product Features:
Direct density or concentration readings; engineering units that can be used include:
g/cm³, kg/m³, specific gravity, °Brix, °Baume, °Plato, °GL, solid percentage content, etc.
* Suitable for flowing or stationary liquids
* Suitable for pipeline and tank density measurement
Integrated structure with no moving parts
Standard industrial and hygienic process connections
* Optional GPRS wireless remote transmission function for the converter
* The gauge features an integrated temperature sensor, providing accurate temperature compensation
Online remote verification, digital local display
Factory multi-point linear correction for higher accuracy
* On-site Recalibration: No need for standard reference source, no experimental calibration required, no interruption during the process.
* The converter is compatible with wall-mounted, embedded, and desktop installation methods.
* The converter features a touchscreen display for a more user-friendly interface.
Technical Specifications:
| Sex Available Please provide the Chinese content to be translated. Numbers | Accuracy (1) | ±0.001 g/cc | ±1.0 kg/m3 | ||
| Scope of Work (2) | 0~3 g/cc | 0~3000 kg/m2 | 0~187.4lb/ft3 | ||
| Repetitive | ±0.0001 g/cc | ±0.1 kg/m3 | ±0.006 lb/ft3 | ||
| Process Temperature Influence (Corrected) (3) | ±0.0001 g/cc | ±0.1 kg/m3 | (per °C) | ||
| Process Pressure Influence (Corrected) (4) | Negligible | ||||
| Process Temperature (5) | – From -58°F to +302°F (-50°C to +150°C) | ||||
| Ambient Temperature | – 40°C to +85°C (–40°F to +185°F) | ||||
| High work pressure (6)(7) | 886 (Short Rod) | 3000 psi (207 bar) | |||
| 886 (Long Rod) | 1400 psi (100 bar) | ||||
| Test Pressure | Tested under 1.5 times the working pressure | ||||
| Ingress Protection (IP) Rating | IP65 | ||||
| Seal Structure Material Material | Filling Components | 886 (short shaft) | Stainless Steel 316L, Alloy C22, Alloy B3, Alloy 400, Zirconium, or Titanium |
| 886 (Long Rod) | Stainless Steel 316L | ||
| Electronic component casing | 886 (Short Rod) | Aluminum alloy casting | |
| 886 (Long Handle) | Aluminum alloy castings | ||
| Gear齿 polishing | 886 | Standard, PFA coating or electrolytic polishing |
| Please provide the Chinese content to be translated. Quantity | Weight | 886 (Short Handle) | Typical value is 4.3 kg. |
| 886 (Long Rod) | Dependent on rod length | ||
| Features | Power requirements | Voltage | 24VDC (four-wire system required) |
| Output | Frequency Output | Power modulation on the power line in a 2-wire system (4-20mA) |
Dimensions:
