Model:Silicone gel removal Packing:1L

Application: This product is developed for dissolving silicone rubber. We use multiple imported nanomaterials to synthesize and specifically solve the technical problem of difficult removal of silicone rubber. No corrosion to ABS, PC, PCB, and chips, does not affect electrical performance, and does not affect various indicators of components.

2、 Scope of application
1. Single and two-component condensed silicone (room temperature cured silicone rubber RTV-1 and RTV-2)
2. Single and two-component addition molding silicone (heat cured silicone rubber)
3. Injection molding or liquid high-temperature vulcanized silicone rubber
4. Other silicone rubber products can be tested by oneself
5. Independent research and development, we can adjust according to customer requirements. We can customize what you want to corrode or not corrode.

3、 Usage method:
For large-scale dissolution of silicone rubber, please soak it in a container.
For smaller areas, soaking can be done by applying dots.
3. The soaking and dissolution time varies depending on the thickness of the adhesive layer, taking approximately 5-30 minutes. If the thickness of the silicone is thick, it will take longer.
4. This product is soaked in dissolved silicone gel and can be reused repeatedly until it thickens and becomes ineffective.
5. This product can be stored in a completely sealed state for up to 12 months, and it is recommended that customers use it for 6 months.

4、 Precautions
1. Be careful not to cause harm to your product. Before mass use, please conduct testing and experimentation.
2. If it accidentally gets into the eyes, please rinse with clean water for at least 15 minutes.
3. Seal the bottle cap after use to prevent volatilization and failure.
4. This product is not flammable and can be stored in a cool and dry place normally. Pay attention to ventilation when using.