Tangential flow fans can be used for general ventilation and air exchange under the following conditions:
Application: Suitable for indoor ventilation and air exchange in general factories and buildings, it can be used both for intake and exhaust of gases.
2. Types of gases conveyed: air and other non-flammable gases, harmless to the human body and non-corrosive to steel.
3. Impurities in the gas: No sticky substances are allowed in the gas, and the dust and hard particle content should not exceed 150mg/m³.
4. Custom designs with magnetic motor drive are available for users' special needs, achieving stepless speed variation and variable air volume configurations.
Gas Temperature: Not exceeding 80℃

The oblique flow fan test operation should be conducted after the overall inspection passes. To prevent motor overload, close the flow control valve before starting the fan to ensure a no-load state at startup. The oblique flow fans are dispatched promptly, and then gradually open the valve to operate at full load or the designed operating condition.
If abnormal phenomena such as severe vibration or impact are detected during the operation of the vane axial fan, the vane axial fan has no intermediaries, and it must be stopped immediately for inspection.
If the operating condition point shifts and causes the motor to overload, to prevent motor overload, the flow control valve can be closed slightly to keep the motor within its rated current.
Regularly clean out dust, dirt, and other impurities from the internal components of the cross flow fan to prevent rust.

Tangential flow fans, also known as mixed flow fans, are a type of fan that falls between axial flow fans and centrifugal fans. Tangential flow fan manufacturers, the impellers of tangential flow fans allow air to undergo both centrifugal and axial movements. The air movement inside the casing of a tangential flow fan combines both axial and centrifugal motion forms.
Common materials used in the manufacturing of oblique flow fans include steel, glass fiber reinforced plastic, and aluminum.
The main components of the tangential flow fan include: motor, impeller, outer casing, inner casing, guide vanes, base feet, etc.
The tangential flow fan is designed using the meridian acceleration method and the "quasi-tr ternary" flow theory, featuring a conical wheel structure, twisted blade shapes, and an intake with a collector installed.

Purple Sun Air Conditioning (Illustration) - Oblique Flow Fan Manufacturer - Oblique Flow Fans provided by Dezhou Purple Sun Air Conditioning Equipment Co., Ltd. Striving for the future, forging ahead. Dezhou Purple Sun Air Conditioning Equipment Co., Ltd. is committed to becoming a strategic partner for win-win, co-exist, and joint progress with you, and is also determined to be a competitive relay enterprise. Let's soar together and achieve success!
































