Overview of 2D Blending Machine

    EYHThe twin-arm drive two-dimensional motion mixer is mainly composed of three major parts: the drum, the swinging frame, and the machine frame. The drum is mounted on the swinging frame, supported by four roller wheels, and axially positioned by two stop wheels. Among the four support roller wheels, two drive wheels are driven by the rotating power system to rotate the drum. The swinging frame is driven by a set of crank pendulum mechanism, which is mounted on the machine frame. The swinging frame is supported on the machine frame by a bearing assembly.EYHThe type 2D motion hybrid mixer is widely used in industries such as chemicals, food, dyes, and feed, particularly suitable for large tonnage.1000L～10000LA mixture of various powdered and granular materials.

Technical Description: 2D Blending Machine

   The two-axis motion hybrid mixer, driven by double arms, consists of a hopper, upper frame (oscillating bed), lower frame, rotating mechanism, swinging mechanism, and electrical equipment.

   Material drums and all exposed parts are made of stainless steel, with full welding inside and outside at the drum area. The workbench with both inner and outer polishing is made of anti-slip patterned board, with the equipment support... Outsource galvanized steel painting.

The rotating mechanism is located inside the upper frame, powered by a cycloidal pinwheel reducer for transmission. During operation, the reducer drives the drive shaft via sprockets and chains, which then rotates the hopper through the driven wheel.

   The oscillating mechanism is located within the lower frame, with transmission via a cycloidal pinion reducer or worm reducer. During operation, the motor transmits power to the reducer through a belt pulley or chain wheel, which then oscillates the upper frame via a double rod assembly, causing the material cylinder to swing at a certain angle. Compared to other manufacturers' structures, this design ensures that no material accumulates at the bottom of the equipment base.^Easy to rinse, truly compliantGMPRequirements.

  While in operation, under the combined action of the rotating and oscillating mechanisms, the feeding cylinder rotates while also oscillating, thereby ensuring thorough mixing of the material inside. The mixing time for each batch is approximately15-20minCompletely and evenly mixed.

  The equipment is configurable with an automatic vacuum feeding machine and interface, facilitating material feeding and shortening operation time.

  All传动 components and electrical equipment are^Premium products.

Two-dimensional mixer main applications and features:

   EYHThe twin-arm driven two-dimensional motion hybrid mixer's drum can perform two movements simultaneously, one being the drum's self-rotation, and the other being the drum's swing with the swing frame. As the mixed material rotates, flips, and blends within the drum, it also undergoes reciprocating mixing movements left and right due to the drum's swing. Under the combined effect of these two movements, the material achieves thorough mixing in a short period. The discharge port of the mixing drum features spiral blades, endowing the mixer with rapid mixing, high capacity, and convenient output.

EYHThe twin-shaft mixer is suitable for blending all powdery and granular materials.

    The two-armed drive 2D mixer features a simple structure, low failure rate, stable operation, safe operation, and no noise. This equipment has been technically improved by our company to use two-armed drive, which is more stable than the general single-armed drive. The indirect drive reduces the load on the reducer, extending its service life. The frame is designed with a full-enclosed structure for easy cleaning and meetsGMPStandard.