Section II: Product Overview
LQZThe centrifugal spray cooling granulation unit is a highly practical and targeted product, specifically designed by our company for the cooling and granulation of low-melting point materials.“Tailor-made”Thoughtfully designed equipment.
Section 3: Technical Features
●Specially designed vortex air distributor, strengthened the interaction between cold air and hot droplets, based on the fundamental principles of aerodynamics and hydrodynamics. Quality heat exchange, while the system's intake air utilizes reverse-In-line method ensures that the molten droplets are thoroughly and effectively cooled by cold air, completing the cooling granulation process.
●The granulation tower is equipped with a jacketed air-cooling unit, ensuring that the inner wall of the granulation tower does not accumulate material.“Thermoplastic Wall Hanger”Phenomenon.
●Patented“Low-profile hat style”Air exhaust structure device, guaranteed90%The finished products are collected at the bottom of the granulation tower, with only a small amount of fine powder entering the cyclone. Air separator, reducing the gas-solid separation pressure of the cyclone separator.
●All air entering the granulation tower system undergoes primary, middle, and ultra-fine three-stage filtration, achieving purification levels of over 300,000.
●Tower wall, powder outlet pipeline, and cyclone separator material selectionSUS304/BAMirror-polished stainless steel sheets, all welds are treated with TIG and laser welding, welds are ground and polished, with a polishing accuracy of0.3μEffectively prevent pipeline“Powder and material accumulation”The powder discharge pipeline and cyclone separator are equipped with quick-release cleaning ports for easy disassembly, cleaning, disinfection, and sterilization, fully meeting food hygiene requirements.
●The product recycling system is equipped with a dedicated secondary fluidized bed cooling and drying unit, which re-cools and re-dries the micronized powder after completion of the spray granulation process. The cooled and dried finished products have good fluidity, low temperature, and can be packaged directly.
Section 4: Application Scope
Fat powders, palm oil, amino acids, paraffin, glycerol esters, beef fat, etc., food additives, plastic auxiliaries, stearic acid, zinc stearate, light stabilizers, food monoglycerides, Sinopec monoglycerides, sodium bisulfate, hydrogenated palm oil Nitric acid, etc.
Introduction Design Scheme One: (Parameters determined based on material characteristics)
Cooling Spray Granulator (Microspherical)
This equipment is primarily used for the spray cooling and granulation of molten chemical materials such as polyvinyl acetate, paraffin, amino fats, glycerol esters, and rubber plastic additives, and can meet various particle size requirements for customers.
Spray Cooling Products/Spray condensation process,The molten material sprays into the cooling tower, forming spherical particles.
Spray Cooling
The cooling process is achieved by introducing an adequate amount of low-temperature air. The molten material is atomized or granulated by a rotating atomizer fitted with a specially designed wheel, or alternatively, atomization can be done using a pressure nozzle or a twin-stream nozzle. Spray cooling is used in the chemical and food industries, and it is an appropriate method for processing molten materials into free-flowing particles with controlled particle size.
