GW-200T double-beam four-column hydraulic press features:
1. Features centralized button control with three operation modes: adjustment, manual, and semi-automatic.
2. Equipped with an emergency stop button; pressing it will immediately halt the press.
Wiring: Clear and orderly wiring, non-interfering, easy to repair in case of failure.
3. Hard chrome-plated after medium-frequency quenching of guide columns and piston rods; no rust or roughness.
4. The oil pump inlet is equipped with a high-pressure oil pump filter, effectively resolving the valve sticking issue, controlling hydraulic system contamination, improving the cleanliness of the hydraulic system, and enhancing work efficiency.
5. The oil line connections utilize imported high-pressure hoses, significantly reducing machine noise.
| Model | GW-60T | GW-100T | GW-150T | GW-200T | GW-250T |
| Nominal Pressure (KN) | 600 | 1000 | 1500 | 2000 | 2500 |
| Maximum Liquid Pressure (Mpa) | 25 | 25 | 25 | 25 | 25 |
| Travel Distance (mm) | 240 | 240 | 240 | 250 | 350 |
| Maximum distance from pressure head to worktable (mm) | 570 | 750 | 720 | 750 | 800 |
| Minimum distance from pressure head to worktable (mm) | 330 | 510 | 480 | 500 | 450 |
| Drop Rate of Pressure Head (mm/min) | 80 | 80 | 70 | 60 | 50 |
| Pressure Head Rise Rate (mm/min) | 60 | 50 | 50 | 40 | 40 |
| Workbench Effective Size (mm): Front to Back x Left to Right | 500x520 | 550x660 | 550x650 | 650x600 | 720x720 |
| Motor Power (kw) | 3.0 | 5.5 | 5.5 | 7.5 | 15 |
| Oil Pump Displacement | 10 | 16 | 20 | 40 | 63 |
