Operation Principle of Ultrasonic Humidifier:

The ultrasonic series humidifiers utilize high-frequency electronic oscillation circuits, where ultrasonic energy is directly applied to water through transducer plates, resulting in the water being atomized under the intense ultrasonic cavitation effect. The atomized water forms fine droplets with a diameter of only 1-5μm, which are then blown into the humidification area through a unique air duct. These water mist particles undergo a thermal and moisture exchange with the moving air, achieving the goal of humidifying the air to an isenthalpic state.

The ultrasonic humidifier is designed for two modes of use. It can be hung on the exterior wall or rolled with casters, accommodating various usage conditions. The humidifier features waterless protection and automatic water filling upon power-on, with an automatic water level control function.

Section 3: Description of System Performance Features:

1. The mist particles produced by the ultrasonic humidifier have a diameter of only 1-5μm, easily absorbed by the air, with an efficiency close to ***. The particles are small and uniform, allowing for long-distance transportation. It adds moisture to the air without any dripping, using φ110mm PVC pipes to convey the mist. A single PVC pipe can transport the mist up to 40-50 meters away, eliminating the need for nozzles and any associated clogging issues.

2. Low energy consumption index per unit of humidity addition, with only 0.05 kW/(kg.w), which is 1/10 to 1/15 of other humidification methods, resulting in low operating costs.

3. Featuring cutting-edge atomization technology and integrated atomization components, our unique design includes waterproofing for the fan, leak-proof mist outlet, easy-to-clean structure, and water shortage protection device. Enhanced with Taiwan-imported 60,000-hour long-life needle roller bearings fan, we guarantee superior humidification quality and reliable performance.

4. Humidifiers operate without mechanical drive, no high-power motor, not purely mechanical energy-driven humidification, no need for compressed air, no noise interference, and no pollution. Low failure rate, energy-saving and environmentally friendly, reliable, practical – your ideal choice.

5. The model has a small size and can form a standalone system based on on-site conditions. It is suitable for installation in newly constructed factories and can also upgrade old factories without damaging existing equipment, meeting the humidity requirements of the production process.

Key Features of the Core Atomizer:

(1) Additional comparison capacitors have been added to the circuit, enhancing the atomizer's adaptability to the quality of atomized water. The same atomizer can operate normally with either pure water or tap water.

(2) Enhanced with adjustable power circuitry, the atomizer has a wider power adaptation range, operating normally at both low voltage (160V) and high voltage (250V), ensuring the product remains functional in environments with significant fluctuations in utility power.

(3) Equipped with an startup delay circuit, the atomizer begins to operate 1-2 seconds after power-on, preventing excessive startup current that could damage the product.

(4) Each individual transducer sheet is designed with an independent circuit, featuring an overcurrent protection circuit to prevent the burning of a single transducer sheet's circuit from damaging the power supply, and it will not affect the normal operation of other transducer sheets.