Multi-surface mixer with variable frequency motor
Nanjing Spherical Planetary Blender Manufacturer
SGJ-1500 Dual-Curved Blender
Motor Power: 2.2 kW
Propeller Material: Glass Reinforced Plastic
Features of the Double-Sided Curved Blender:
Flow gently, three-dimensional circulation, no dead spots due to stirring.
2. Adjust the flow rib height to accommodate varying water depths.
3. Elastic fixed connection, smooth and reliable operation
4. Compact overall structure, reliable operation, easy installation and maintenance, and low investment costs.
5. The impeller is made of fiberglass, capable of accommodating various operating conditions and boasting a long service life.
6. Suitable for mixing liquids, solids, and gases; it can replace existing mixers to achieve three-dimensional, spiral mixing, ensuring more uniform blending. The alternating arrangement of left and right spiral directions enhances mixing efficiency.
7. The dual-curved mixer features a larger specific surface area impeller, with a smaller power configuration, larger circulating water flow, and low energy consumption, saving up to 30%~50% of energy compared to traditional mixing methods.
Double-curved mixer glass fiber blade features: Long service life, not easy to break or crack, good mechanical properties.
Low-speed Submersible Propulsion Material: Propeller blade made of imported polyurethane material, motor housing cast iron.NSKBearings, products can be customized according to customer requirements.!The low-speed flow generator was developed and produced by our company based on the absorption of cutting-edge technology, featuring a high technical starting point, significant energy saving, strong safety, and unique functions.
The dual-curved mixer's leakage protection feature is designed to detect any water leakage inside the submersible mixer. When water leakage occurs within the mixer
Leakage will trigger corresponding alarm and control signals.
Low-speed Flow Impeller Motor Overheat Protection Function is specifically designed to monitor the temperature of the stator winding within the submersible mixer equipment. When the stator...
When abnormal temperature conditions occur, the electronic controller will emit the corresponding alarm and control signals, or automatically shut off power, to protect the motor stator winding.
Burnt for convenience in staff performing timely maintenance on the diving double曲面 mixer.
Blade assembly
Note:
Before installing the submersible propeller, first select the angle adjustment blade according to the working conditions.
Ensure both blades are installed at the same angle.
Step1Loosen the wheel hub.1Top Cover2Screw (of )3）（M16*80Left-hand thread), remove the bottom cover.
Steps2Insert a blade into the hub's hole from above, positioning the blade shaft slot outward, and adjust the selected angle of the blade.4Place into the slot of the impeller shaft, connect with the hub using two bolts, and first tighten the bolt on the left side with a hex wrench.5), then tighten the screw on the right (6）。
To facilitate the installation of two blades, rotate the hub.180oInstall two blades using the aforementioned method.
Step3Cover the top lid, and place the two toothed washersM16*80Left-hand threaded screws are tightened into place.
Wooden box packaging
Logistics Transportation
Provide on-site installation guidance
