XL-1005Waterborne epoxy curing agent(Raw Material
1. Product Description
JXL-1005It is a non-ionic waterborne epoxy curing agent in its original liquid form. Compared to traditional waterborne epoxy curing agents, it boasts superior permeability, low viscosity, high solid content, and high flexibility, making it particularly suitable for floor coatings.
2. Product Features
Product Specifications | Curing Indices | ||
Appearance | Light yellow transparent liquid | Adhesion, grade | ＜1 |
Viscosity | 3000-6000Mpa.s/25℃ | Flexibilitymm | 1 |
Operation Time | 40min | Hardness7d | 3H |
Active Equivalent | 210 | Table dry25℃ | 2h |
With100gEpoxy128Usage Amount | 100 | Down-to-earth25℃ | 8h |
Fixed Content | 55+2﹪ | Water resistance7d） | No change |
Diluent | Water | Durable10﹪NaOH（7d） | No changes |
3. Floor Coating Application Formula
3.1Water-based epoxy primer formula
AComposition: Epoxy Resin128 | 50 |
BComponents:JXL-1005 | 50 |
Diluent:Water | 200-300 |
Note:A,BMix the components first, ensure thorough blending, then add the required amount of water and mix well before application.
3.2Water-based epoxy intermediate mortar (putty) formula
AComposition: Epoxy Resin128 | 50 |
BComposition:JXL-1005 | 50 |
Diluent:Water | 100 |
Cement: Powder:Quartz sand:(0.5:0.5:1.5) | 200-400 |
Note:A,BMix the components first, then stir thoroughly until well blended. Add the required amount of water, mix well, and gradually add sand until the desired consistency for application is reached.
