XL-SM-35Water-based epoxy textured finish paint

Product Description:Water-based epoxy floor texture paint is a two-component, reactive curing, green and environmentally friendly coating made from waterborne epoxy resin, used for anti-slip surface paint on concrete, steel, and stone surfaces.

Application Range:Especially suitable for wet, oily, parking lot surfaces, and any areas requiring anti-slip properties.

FeaturesMade from high-quality resins and water-based hardeners, featuring a smooth surface with adjustable grain sizes, it is resistant to acid, alkali, and oil corrosion, as well as wear, pressure, and impact.

Technical Data:Adhesion: Level 1; Compressive Strength: 80MPa; Shore Hardness: 85; Abrasion Resistance: 25mg.

Product Ratio:Group A: Group B=5:1：

User GuideThe base concrete must reach a strength of C25, with a smooth, dense surface free of loose materials, oil stains, and other debris. The base surface should not exhibit condensation, be relatively dry, with a moisture content not exceeding 12%, and be used in an environment with a temperature of no less than 15℃ and humidity not exceeding 75%.

Usage RequirementsWhen mixing materials, slowly pour B material into A material in proportion while using mechanical stirring, with a minimum stirring time of 3 minutes. The stirring time can be appropriately extended based on the environmental temperature. After A and B materials are mixed evenly, one person should use a spatula to scrape and the other person should use a textured roller to ensure uniform texture. The mixed slurry must be used up within 30 minutes, and the construction site must be well-ventilated.

Packaging, Storage, and Transportation

Packaging, plastic drum packaging, per set30Kilograms.

This product should be10-40Store in a well-ventilated, dry warehouse; shelf life is 6 months.

Non-hazardous goods, may be transported as general cargo.